Mitsubishi Outlander (2003+). Manual — part 482
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-217
INSPECTION PROCEDURE J-6: Any of tail lamps, position lamps or licence plate lamp does not
illuminate.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
FRONT-ECU
LICENCE
PLATE LAMP
RELAY
BOX
TAIL LAMP
RELAY
REAR
COMBINATION
LAMP (TAIL: LH)
REAR
COMBINATION
LAMP (TAIL: RH)
HEADLAMP
ASSEMBLY
(POSITION)
(LH)
(RH)
(LH)
(RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Tail lamps, Position Lamps and License Plate Lamps Circuit <LHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-218
COMMENTS ON TROUBLE SYMPTOM
If the tail lamps, the position lamps or the licence
plate lamps do not illuminate, the wiring harness
connector(s), the bulb or the fuse may be defective
or burned out.
POSSIBLE CAUSES
•
Burned-out bulb
•
Damaged harness wires and connectors
FRONT-ECU
LICENCE
PLATE LAMP
RELAY
BOX
TAIL LAMP
RELAY
REAR
COMBINATION
LAMP (TAIL: LH)
REAR
COMBINATION
LAMP (TAIL: RH)
HEADLAMP
ASSEMBLY
(POSITION)
(LH)
(RH)
(LH)
(RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Taillamps, Position Lamps and License Plate Lamps Circuit <RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-219
DIAGNOSTIC PROCEDURE
Step 1. Connector check: D-14 <right tail lamp>
or D-19 <left tail lamp> rear combination lamp
connector, A-29 <right position lamp> or A-16
<left position lamp> headlamp assembly
connector, F-08 <right licence plate lamp> or
F-10 <left licence plate lamp> licence plate lamp
connector
AC308679
5
6
3 2
4
1
A-16(B)
AC
Connector: A-16
Harness side
<LHD>
AC308686
5
6
3 2
4
1
A-16(B)
AC
Connector: A-16
Harness side
<RHD>
AC308677AC
A-29(B)
5
6
3 2
4
1
Connector: A-29
Harness side
<LHD>
AC308684
AC
A-29(B)
5
6
3 2
4
1
Connector: A-29
Harness side
<RHD>
AC308784
Connectors: D-14, D-19
1
3
4
5
2
6
AB
D-14
1
3
4
5
2
6
D-19
Harness side
D-19
D-14
<LHD>
AC308788
Connectors: D-14, D-19
1
3
4
5
2
6
AC
D-14
1
3
4
5
2
6
D-19
Harness side
D-19
D-14
<RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-220
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the defective connector.
Step 2. Check the bulbs of the tail lamps, the
position lamp or the licence plate lamp.
Check the bulb of the lamp which does not
illuminate.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Replace the bulb of the lamp which does not
illuminate.
AC308809
Connectors: F-08, F-10
AD
F-08
F-08(GR)
Harness side
F-10(GR)
2 1
F-10
2 1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст