Mitsubishi Grandis. Manual — part 215
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-322
Step 2. ETACS switch data by using the SWS
monitor.
Check the ETACS-ECU signals which are related to
the hazard warning lights.
• Hazard lamp switch: ON
OK: Normal condition is displayed.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Refer to inspection procedure Q-12 "The
hazard warning lamp switch signal is not
received
Step 3. Retest the system.
Check that the hazard warning lamps illuminate.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the ETACS-ECU.
Item No. Item name
Normal condition
Item 04
HAZARD LMP SW ON (only when
switch is operated)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-323
Inspection Procedure N-3: Any of the turn-signal lamps does not illuminate.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-324
FRONT
TURN-SIGNAL
LAMP (LH)
REAR
TURN-SIGNAL
LAMP (LH)
ETACS-ECU
J/B SIDE
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
DOOR
MIRROR
ASSEMBLY
(LH)
SIDE
TURN-
SIGNAL
LAMP
Left Turn-Signal Lamps Circuit <LHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-325
FRONT
TURN-SIGNAL
LAMP (LH)
REAR
TURN-SIGNAL
LAMP (LH)
ETACS-ECU
J/B SIDE
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
DOOR
MIRROR
ASSEMBLY
(LH)
SIDE
TURN-
SIGNAL
LAMP
Left Turn-Signal Lamps Circuit <RHD>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст