Mitsubishi Grandis. Manual — part 43
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-169
POWER WINDOW
SUB SWITCH
POWER
WINDOW MOTOR
POWER
WINDOW MAIN
SWITCH
(FRONT: LH)
(FRONT: RH)
POWER
WINDOW MOTOR
(FRONT: LH)
CPU
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
HALL IC
HALL IC
HALL IC
HALL IC
Power Window (front) Circuit <RHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-170
COMMENTS ON TROUBLE SYMPTOM
The revolution detection sensor, which is
incorporated in the power window motor, may be
defective.
POSSIBLE CAUSES
• Malfunction of the power window motor
DIAGNOSIS PROCEDURE
Step 1. Check the power window operating
current.
Check that the power window operating current is
normal (Refer to GROUP 42
− Door − On-vehicle
Service
Q: Is the check result normal?
YES :
Adjust the door window glass (Refer to
GROUP 42
− Door − On-vehicle service
), and then go to Step 2.
NO :
Replace the defective power window motor
which operating current are abnormal.
Step 2. Confirm the power window learning
function.
Check that the power window switch has learned the
fully closed position of the windows (Refer to
GROUP 42
− Door
).
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Make the power window switch learn the
fully closed position of the windows (Refer
to GROUP 42
− Door
Power Window (rear) Circuit
POWER WINDOW
SUB SWITCH
POWER
WINDOW MOTOR
(REAR: RH)
POWER WINDOW
SUB SWITCH
(REAR: LH)
(REAR: LH)
POWER
WINDOW MOTOR
(REAR: RH)
HALL IC
HALL IC
HALL IC
HALL IC
CPU
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-171
Step 3. Determine a trouble spot.
Q: Which door does the power window anti-trap
function fail on?
Driver's door <LH drive vehicles> :
Go to Step 4.
Driver's door <RH drive vehicles> :
Go to Step 7.
Front passenger's door <LH drive vehicles> :
Go
to Step 10.
Front passenger's door <RH drive vehicles> :
Go
to Step 16.
Rear right door :
Go to Step 22.
Rear left door :
Go to Step 28.
Step 4. Connector check: F-05 power window
main switch connector and F-10 power window
motor (front: LH) connector
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Repair the defective connector.
Step 5. Check the wiring harness from F-05
power window main switch connector terminal
Nos.8, 9, 10 and 12 to F-10 power window motor
(front: LH) connector terminal Nos.6, 2, 4 and 5.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the wiring harness.
Step 6. Retest the system.
After the power window main switch is replaced,
check that the driver's power window anti-trap
function works.
(1) Replace the power window main switch.
(2) Check that the driver's power window anti-trap
function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window motor (front:
LH).
AC311151
AC311151
AB
Connectors: F-05, F-10
Harness side
<LHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05
F-10
Harness side
F-05(B)
F-10(B)
AC311151
AC311151
AB
Connectors: F-05, F-10
Harness side
<LHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05
F-10
Harness side
F-05(B)
F-10(B)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-172
Step 7. Connector check: F-05 power window
main switch connector and F-16 power window
motor (front: RH) connector
Q: Is the check result normal?
YES :
Go to Step 8.
NO :
Repair the defective connector.
Step 8. Check the wiring harness from F-05
power window main switch connector terminal
Nos.8, 9, 10 and 12 to F-16 power window motor
(front: RH) connector terminal Nos.6, 2, 4 and 5.
• Check the input and output lines to the revolution
detection sensor for open or short circuit.
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Repair the wiring harness.
Step 9. Retest the system.
After the power window main switch is replaced,
check that the driver's power window anti-trap
function works.
(1) Replace the power window main switch.
(2) Check that the driver's power window anti-trap
function works.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window motor (front:
LH).
AC310214
AC310214
AB
Connectors: F-05, F-16
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
F-16(B)
F-05
F-16
Harness side
AC310214
AC310214
AB
Connectors: F-05, F-16
Harness side
<RHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
F-16(B)
F-05
F-16
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст