Mitsubishi Grandis. Manual — part 256
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-486
COMMENTS ON TROUBLE SYMPTOM
Input signal from the power window main switch is
used in order to check the power window main
switch and confirm how the system is communicating
with the ETACS-ECU. If the communication line is
defective, the power windows will not work normally.
POSSIBLE CAUSES
• Malfunction of the power window main switch
• Malfunction of the ETACS-ECU
• Damaged harness wires and connectors
POWER
WINDOW RELAY
ETACS-ECU
DIAGNOSIS
CONNECTOR
POWER WINDOW
MAIN SWITCH
FUSIBLE
LINK
5
FRONT SIDE
J/B SIDE
CPU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Power Window Main Switch Input Circuit <RHD>
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-487
DIAGNOSIS PROCEDURE
Step 1. ECU check on the SWS monitor
Check that the power supply and earth lines to the
power window main switch (power window module)
and the SWS communication lines are normal.
• Turn the ignition switch to the ON position.
ECUS TO BE CHECKED
• P/W MODULE
OK: "OK" is displayed on the "P/W
MODULE" menu.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to Inspection Procedure A-5
"Communication with the power window
main switch (power window module) is not
possible
Step 2. Function diagnosis by using the SWS
monitor
<Selected item> POWER WINDOW
• Turn the ignition switch to the ON position.
• Power window main switch: UP
OK: Normal condition is displayed.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the ETACS-ECU.
Item No. Item name
Normal conditions
Item 71
P/W ECU ACK INPUT CHECK (only
momentarily when
switch is operated)
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-488
Inspection Procedure Q-10: When the sunroof switch is operated, the switch signals are not received.
CAUTION
Whenever the ECU is replaced, ensure that the
input signal circuit is normal.
SUNROOF MOTOR
ASSEMBLY
CPU
SUNROOF
SWITCH
ETACS-
ECU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Sunroof Switch Input Circuit <LHD>
INPUT SIGNAL PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-489
COMMENTS ON TROUBLE SYMPTOM
If the input signal from the sunroof switch is
abnormal, the sunroof input check response signal
will not be sent to the SWS communication line.
POSSIBLE CAUSES
• Malfunction of the sunroof assembly
• Malfunction of the sunroof switch
• Damaged harness wires and connectors
DIAGNOSIS PROCEDURE
Step 1. ECU check on the SWS monitor
Check that the power supply and earth lines to the
sunroof-ECU and the SWS communication lines are
normal.
• Ignition switch: ON
ECUS TO BE CHECKED
• Sunroof-ECU
OK: "OK" is displayed on the "sunroof-ECU"
menu.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to Inspection Procedure A-6
"Communication with the sunroof-ECU is
not possible"
SUNROOF MOTOR
ASSEMBLY
CPU
SUNROOF
SWITCH
ETACS-
ECU
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Sunroof Switch Input Circuit <RHD>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст