Mitsubishi Grandis. Manual — part 164
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-118
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
Step 10. Connector check: F-20 door lock
actuator (rear: RH) connector
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Repair the defective connector.
Step 11. Check the door lock actuator (rear: RH).
Check that the door lock actuator (rear: RH) is in
good condition. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Replace the door lock actuator (rear: RH).
Step 12. Connector check: C-219 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the defective connector.
Step 13. Check the wiring harness from C-219
ETACS-ECU connector terminal Nos.12 and 13 to
F-20 door lock actuator (rear: RH) connector
terminal Nos.4 and 6.
NOTE:
Prior to the wiring harness inspection, check D-03
intermediate connector and C-210 junction block
connector, and repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
AC310216
Connector: F-20
Harness side
AE
F-20(B)
AC310626AD
Connector: C-219 <LHD>
Junction block (Rear view)
Junction block side
AC310626AD
Connector: C-219 <LHD>
Junction block (Rear view)
Junction block side
AC310216
Connector: F-20
Harness side
AE
F-20(B)
AC310623
Connector: C-210
AN
<LHD>
Junction block (Front view)
Harness side
AC310633 AB
Connector: D-03 <LHD>
D-03(B)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-119
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
Step 14. Connector check: F-08 door lock
actuator (rear: LH) connector
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the defective connector.
Step 15. Check the door lock actuator (rear: LH).
Check that the door lock actuator (rear: LH) is in
good condition. Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 16.
NO :
Replace the door lock actuator (rear: LH).
Step 16. Connector check: C-219 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 17.
NO :
Repair the defective connector.
Step 17. Check the wiring harness from C-219
ETACS-ECU connector terminal Nos.12 and 13 to
F-08 door lock actuator (rear: LH) connector
terminal Nos.4 and 6.
NOTE:
Prior to the wiring harness inspection, check D-16
intermediate connectors and C-210 junction block
connector, and repair if necessary.
• Check the input and output lines for open circuit.
Q: Is the check result normal?
AC310209
Connector: F-08
Harness side
AD
F-08(B)
AC310626AD
Connector: C-219 <LHD>
Junction block (Rear view)
Junction block side
AC310626AD
Connector: C-219 <LHD>
Junction block (Rear view)
Junction block side
AC310209
Connector: F-08
Harness side
AD
F-08(B)
AC310623
Connector: C-210
AN
<LHD>
Junction block (Front view)
Harness side
AC310207
AB
Connector: D-16
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-120
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-121
Inspection Procedure C-5: A door can not be locked or unlocked by the central door locking system.
<RH drive vehicles>
Central Door Lock Circuit <RHD>
ETACS-ECU
DOOR LOCK
ACTUATOR
(FRONT: RH)
DOOR LOCK
ACTUATOR
(FRONT: LH)
DOOR LOCK
ACTUATOR
(REAR: LH)
DOOR LOCK
ACTUATOR
(REAR: RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
DOOR
UNLOCK
RELAY
DOOR
LOCK
RELAY
J/B SIDE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст