Mitsubishi Grandis. Manual — part 339
DOOR TRIM
INTERIOR
52A-12
DOOR TRIM
REMOVAL AND INSTALLATION
M1521006400138
AC310945
6
3
1
2
5
3
4
C
C
A
A
B
B
NOTE
: Clip position
Section A – A
Section B – B
Section C – C
1
1
4
Clip
Clip
Clip
AB
<Front door trim>
Removal steps
1.
Front door sash trim
<<A>>
2.
Inside handle screw cap
3.
Door trim screw cap
<<B>>
>>A<<
4.
Front door trim
5.
Pull handle bracket (driver’s side)
6.
Front door arm rest bracket
(passenger’s side)
Removal steps (Continued)
DOOR TRIM
INTERIOR
52A-13
REMOVAL SERVICE POINTS
<<A>> INSIDE DOOR HANDLE SCREW
CAP REMOVAL
Insert a flat-tipped screwdriver as shown to remove
the inside door handle screw cap.
<<B>> FRONT/REAR DOOR TRIM
REMOVAL
1. Insert a flat-tipped screwdriver as shown to
remove the door trim box screw cap.
2. Use a flat-tipped screwdriver as shown to remove
the inside lock cable and the inside handle cable.
Then remove the door trim.
AC310795
1
3
4
2
A
A
Section A – A
3
Clip
<Rear door trim>
NOTE
: Clip position
AB
Removal steps
<<A>>
1.
Inside handle screw cap
2.
Door trim screw cap
<<B>>
>>A<<
3.
Rear door trim
4.
Pull handle bracket
AC302821
(–) screw driver
Inside door handle
screw cap
AB
AC310976
Door trim box
screw cap
(–) screw driver
AB
AC310977
Inside lock cable
Inside handle cable
(–) screw driver
AB
DOOR TRIM
INTERIOR
52A-14
INSTALLATION SERVICE POINT
>>A<< FRONT/REAR DOOR TRIM
INSTALLATION
When the power window switch is removed or
replaced, make the power windows learn the fully
closed position (Refer to GROUP 42, Door Glass
and Regulator
DISASSEMBLY AND REASSEMBLY
M1521006900092
AC310983
10
8
9
1
2
10
7
6
5
4
3
8
Section A – A
NOTE
: Claw position
Claw
AB
<Front door trim>
Front door trim disassembly
steps
>>A<<
1.
Inside door handle
2.
Support panel
3.
Inside handle bezel
4.
Power window switch panel
5.
Power window switch
6.
Front door armrest
7.
Door trim box
8.
Front door courtesy lamp lens
9.
Front door panel inner core
10. Front door trim
Front door trim disassembly
steps (Continued)
DOOR TRIM
INTERIOR
52A-15
REASSEMBLY SERVICE POINT
>>A<< INSIDE DOOR HANDLE
REASSEMBLY
After removing the door inside handle, check it
(Refer to GROUP42, On-vehicle Service
).
AC310985
9
7
6
4
5
3
8
2
1
8
9
Claw
<Rear door trim>
NOTE
: Claw position
AB
Rear door trim disassembly
steps
>>A<<
1.
Inside door handle
2.
Support panel
3.
Inside handle bezel
4.
Power window switch panel
5.
Power window switch
6.
Rear door armrest
7.
Door trim box
8.
Rear door courtesy lamp lens
9.
Rear door trim
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст