Mitsubishi Grandis. Manual — part 388
CENTRE DISPLAY
CHASSIS ELECTRICAL
54A-171
COMMENTS ON TROUBLE SYMPTOM
The CAN bus line wiring harness, connector(s), or
the engine-ECU <M/T> or engine-A/T-ECU <A/T>,
combination meter may be defective. But it is no
problem that "
−" is displayed when the average fuel
consumption display or the possible cruising
distance display is reset.
POSSIBLE CAUSES
• Malfunction of centre display unit
• Malfunction of combination meter
• Damaged wiring harness and connectors
DIAGNOSTIC PROCEDURE
Step 1. MUT-III CAN bus diagnostics
Use the MUT-III to diagnose the CAN bus lines.
Q: Is the check result satisfactory?
YES :
Go to Step 2.
NO :
Repair the CAN bus lines (Refer to GROUP
54D, Diagnosis
− Can Bus Diagnostic Table
). After diagnosing the CAN bus
lines, go to Step 4.
Step 2. MUT-III other system diagnosis code
Check if an combination meter diagnosis code is set.
Q: Is the diagnosis code set?
YES :
and then go to Step 4.
NO :
Replace combination meter and then go to
Step 3.
Step 3. MUT-III other system diagnosis code
Check if an MPI system diagnosis code is set.
Q: Is the diagnosis code set?
YES :
Refer to GROUP13A, Troubleshooting
and then go to Step 4.
NO :
Replace combination meter and then go to
Step 4.
Step 4. Retest the system
Check if the driving information displays normally.
Q: Is the check result satisfactory?
YES :
The procedure is complete.
NO :
Go to Step 1.
CENTRE DISPLAY
CHASSIS ELECTRICAL
54A-172
Inspection Procedure 5: "
−" is displayed on the ambient temperature display.
COMMENTS ON TROUBLE SYMPTOM
The CAN bus line wiring harness, connector(s), or
the A/C-ECU may be defective.
ENGINE-ECU<M/T>
OR
ENGINE-A/T-ECU<A/T>
CENTER
DISPLAY
A/C-ECU
CPU
COMBINATION
METER
NOTE
: LHD
: RHD
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Circuit of Time-out During CAN Communication with A/C-ECU
CENTRE DISPLAY
CHASSIS ELECTRICAL
54A-173
POSSIBLE CAUSES
• Malfunction of A/C-ECU
• Damaged wiring harness and connectors
DIAGNOSTIC PROCEDURE
Step 1. MUT-III CAN bus diagnostics
Use the MUT-III to diagnose the CAN bus lines.
Q: Is the check result satisfactory?
YES :
Go to Step 2.
NO :
Repair the CAN bus lines (Refer to GROUP
54D, Diagnosis
− Can Bus Diagnostic Table
). After diagnosing the CAN bus
lines, go to Step 3.
Step 2. MUT-III other system diagnosis code
Check if an A/C system diagnosis code is set.
Q: Is the diagnosis code set?
YES :
Refer to GROUP 55, Troubleshooting
and then go to Step 3.
NO :
Replace A/C-ECU and then go to Step 3.
Step 3. Retest the system
Check if the ambient temperature displays normally.
Q: Is the check result satisfactory?
YES :
The procedure is complete.
NO :
Go to Step 1.
Inspection Procedure 6: The radio and CD player information cannot be displayed or the display is
not normal.
COMMENTS ON TROUBLE SYMPTOM
The radio and CD player operation screen will be
frozen if the centre display have received abnormal
data from the radio and CD player and via M-bus
communication.
POSSIBLE CAUSES
• Malfunction of radio and CD player
• Damaged wiring harness and connectors
AUDIO
CENTER
DISPLAY
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
M-BUS Line Circuit
CENTRE DISPLAY
CHASSIS ELECTRICAL
54A-174
DIAGNOSTIC PROCEDURE
Step 1. Connector check: Radio and CD player
connector C-22 and centre display unit
connector C-07.
Q: Is radio and CD player connector C-22 and centre
display unit connector C-07 in good condition?
YES :
Go to Step 2.
NO :
Repair the defective connector.
Step 2. Check the wiring harness between radio
and CD player connector C-22 (terminal26, 27
and 34) and centre display unit connector C-07
(terminal 7, 17 and 8).
Q: Is the wiring harness between radio and CD player
connector C-22 (terminal26, 27 and 34) and centre
display unit connector C-07 (terminal 7, 17 and 8)
in good condition?
YES :
Go to Step 3.
NO :
Repair the wiring harness.
AC310614
BR
Connectors: C-07, C-22 <LHD>
C-07
C-22
C-07 (B)
C-22
Harness side
Harness side
AC310632BL
Connectors: C-07, C-22 <RHD>
C-07
C-22
C-07 (B)
C-22
Harness side
Harness side
AC310614
BR
Connectors: C-07, C-22 <LHD>
C-07
C-22
C-07 (B)
C-22
Harness side
Harness side
AC310632BL
Connectors: C-07, C-22 <RHD>
C-07
C-22
C-07 (B)
C-22
Harness side
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст