Mitsubishi Grandis. Manual — part 66
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-261
Step 9. Connectors check: F-13 door mirror
assembly (RH) connectors
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Repair the connector.
Step 10. Check the door mirror assembly (RH).
Check that the electric folding outside rear-view
mirror (RH) works normally. Refer to GROUP 51
−
Door mirror
Q: Is the check result normal?
YES :
Go to Step 14.
NO :
Go to Step 11.
Step 11. Connectors check: F-13-3 retractor
motor (RH) connectors
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Repair the connector.
Step 12. Check the retractor motor (RH).
Check that the electric folding outside rear-view
mirror (RH) works normally. Refer to GROUP 51
−
Door mirror
.
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Replace the retractor motor (RH).
Step 13. Check the wiring harness between
F-13-3 retractor motor (RH) connector terminal
Nos.1, 2 and F-13 door mirror assembly (RH)
connector terminal Nos.7, 6.
• Check the input and output signal line for open
circuit.
Q: Is the check result normal?
YES :
Replace the door mirror assembly (RH).
NO :
Repair the wiring harness.
AC311147
AH
Connector: F-13 <LHD>
Harness side
AC310213
AG
Connector: F-13 <RHD>
Harness side
AC311869AB
Connector: F-13-3
Harness side
2 1
AC311147
AH
Connector: F-13 <LHD>
Harness side
AC310213
AG
Connector: F-13 <RHD>
Harness side
AC311869AB
Connector: F-13-3
Harness side
2 1
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-262
Step 14. Connector check: C-220 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 15.
NO :
Repair the connector.
AC310626
Connector: C-220 <LHD>
Junction block (Rear view)
AE
Harness side
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
AC310620
Connector: C-220 <RHD>
Junction block (Rear view)
AD
Harness side
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-263
Step 15. Check the wiring harness between C-220
ETACS-ECU connector terminal Nos.31, 40 and
F-13 door mirror assembly (RH) connector
terminal Nos.7, 6.
NOTE:
Prior to the wiring harness inspection, check
intermediate connector C-14 and junction block
connector C-32 <L.H drive vehicles>, and repair if
necessary.
• Check the input and output signal line for open
circuit.
Q: Is the check result normal?
YES :
Go to Step 16.
NO :
Repair the wiring harness.
Step16. Retest the system.
Check that the electric retractable remote controlled
mirror works normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the ETACS-ECU.
AC310626
Connector: C-220 <LHD>
Junction block (Rear view)
AE
Harness side
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
AC310620
Connector: C-220 <RHD>
Junction block (Rear view)
AD
Harness side
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
AC311147
AH
Connector: F-13 <LHD>
Harness side
AC310213
AG
Connector: F-13 <RHD>
Harness side
AC310615
AB
Connector: C-14 <LHD>
AC310631
Connector: C-14 <RHD>
AG
AC310613
AG
Connector: C-32 <LHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-264
Inspection Procedure J-3: Electric retractable remote controlled door mirror timer function does not
at all.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If the door mirror can be folded and unfolded with the
remote controlled mirror switch (fold/unfold switch),
the ETACS-ECU may be defective.
POSSIBLE CAUSES
• Malfunction of the driver’s door switch
• Malfunction of the ETACS-ECU
• Damaged harness wires and connectors
DIAGNOSTIC PROCEDURE
Step 1. Check the electric folding door mirrors
operation.
Check that the door mirror is folded and unfolded
with the remote controlled mirror switch when the
ignition switch is at ACC position.
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Refer to inspection procedure J-1 "The
electric retractable remote controlled door
mirrors does not work at all
Step 2. Pulse check
Check the input signals below which are related to
the electric retractable remote controlled door mirror
timer function.
OK: The MUT-III sounds or the voltmeter
needle fluctuates.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Refer to inspection procedure Q-1 "The
ignition switch (ACC) signal is not received
Step 3. Retest the system.
Check that the electric-folding door mirror timer
function works normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the ETACS-ECU.
System switch
Check conditions
Ignition switch (ACC)
When turned from the
LOCK (OFF) position to
the ACC position
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст