Mitsubishi Grandis. Manual — part 245
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-442
Step 3. Connector check: D-17 door switch (front:
LH), D-02 door switch (front: RH) connector, D-13
door switch (rear: LH) connector, D-08 door
switch (rear: RH) connector
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-443
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the defective connector.
Step 4. Check the door switch.
Check the door switch, which corresponds to the
defective door lamp (Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Replace the door lamp bulb.
AC310634AB
Harness side
Connectors: D-02, D-08 <LHD>
D-02, D-08
D-02
D-08
AC310206
AB
Harness side
Connectors: D-02, D-08 <RHD>
D-02, D-08
D-02
D-08
AC310208
AC
Harness side
Connectors: D-13, D-17
D-13
D-17
D-13, D-17
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-444
Step 5. Connector check: C-219 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 6.
NO :
Repair the defective connector.
AC310626
Connector: C-219
Junction block (Rear view)
<LHD>
AB
Junction block side
AC310620
Connector: C-219
Junction block
(Rear view)
<RHD>
AB
Junction block side
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-445
Step 6. Check the wiring harness from C-219
ETACS-ECU connector terminal No.6 to D-17
door switch (front: LH) or D-02 door switch
(front: RH) connector, D-13 door switch (rear: LH)
connector, D-08 door switch (rear: RH) connector
terminal No.2.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст