Mitsubishi Grandis. Manual — part 362
COMBINATION METER
CHASSIS ELECTRICAL
54A-67
DIAGNOSIS PROCEDURE
Step 1. Connector check: Fuel tank pump and
gauge unit assembly connector D-15.
Q: Is fuel tank pump and gauge unit assembly
connector C-02 in good condition?
YES :
Go to Step 2.
NO :
Repair the connector, and then go to Step
11.
Step 2. Check the fuel gauge circuit.
(1) Disconnect fuel tank pump and gauge unit
assembly connector D-15.
(2) Use special tool MB991219 to connect a test
lamp (12 V - 3.4 W) between the wiring harness
connector terminals 1 and 2.
(3) Turn the Ignition switch to "ON" position.
(4) Check if the test lamp illuminates.
OK: Illuminates
Q: Is the check result satisfactory?
YES :
Go to Step 8.
NO :
Go to Step 3.
Step 3. Resistance measurement at fuel tank
pump and gauge unit assembly connector D-15
to check the earth circuit to the fuel tank pump
and gauge unit assembly.
(1) Disconnect fuel tank pump and gauge unit
assembly connector D-15, and measure at the
wiring harness side.
(2) Turn the Ignition switch to "LOCK" (OFF)
position.
(3) Disconnect the negative battery terminal.
(4) Measure the resistance value between terminal 1
and earth.
OK: 2 ohms or less
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Go to Step 4.
AC310207
AG
Connector: D-15
D-15 (GR)
Harness side
AC310207
AG
Connector: D-15
D-15 (GR)
Harness side
AC302533
MB991219
AB
Test lamp
(12 V - 3.4 W)
AC310207
AG
Connector: D-15
D-15 (GR)
Harness side
AC310506
Connector D-15
(Harness side)
CM
COMBINATION METER
CHASSIS ELECTRICAL
54A-68
Step 4. Check the wiring harness between fuel
tank pump and gauge unit assembly connector
D-15 (terminal 1) and earth.
NOTE:
Also check intermediate connector D-28, C-16 for
loose, corroded, or damaged terminals, or terminals
pushed back in the connector. If intermediate
connector D-28, C-16 are damaged, repair or
replace the connector.
Q: Is the wiring harness between fuel tank pump and
gauge unit assembly connector D-15 (terminal 1)
and earth in good condition?
YES :
Go to Step 11.
NO :
Repair the harness, and then go to Step 11.
AC310207
AG
Connector: D-15
D-15 (GR)
Harness side
AC310615
AE
Connector: C-16 <LHD>
AC310631 AD
Connector: C-16 <RHD>
AC310633AE
Connector: D-28 <LHD>
AC310205
AE
Connector: D-28 <RHD>
COMBINATION METER
CHASSIS ELECTRICAL
54A-69
Step 5. Connector check: Combination meter
connector C-02 and fuel tank gauge unit
connector D-07.
Q: Is combination meter connector C-02 and fuel tank
gauge unit connector D-07 in good condition?
YES :
Go to Step 6.
NO :
Repair the connector, and then go to Step
10.
AC310613
AX
Connector: C-02 <LHD>
Harness side
40
20
28
8
34
14
37
17
38
39
1918
35
36
1615
31
11
33
13
32
12
30
10
29
9
23
3
27
7
26
6
24
4
25
5
21
1
22
2
AC310631AU
Connector: C-02 <RHD>
Harness side
40
20
28
8
34
14
37
17
38
39
1918
35
36
1615
31
11
33
13
32
12
30
10
29
9
23
3
27
7
26
6
24
4
25
5
21
1
22
2
AC310633AF
Connector: D-07 <LHD>
Harness side
AC310205
AF
Harness side
Connector: D-07 <RHD>
COMBINATION METER
CHASSIS ELECTRICAL
54A-70
Step 6. Check the wiring harness between
combination meter connector C-02 (terminal 31)
and fuel tank gauge unit connector D-07 (terminal
1).
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст