Mitsubishi Grandis. Manual — part 205
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-282
Step 4. Retest the system.
Check that the headlamp automatic-shutdown
function works normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the ETACS-ECU.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-283
Inspection Procedure M-6: Any of tail lamps, position lamps or licence plate lamp does not illuminate.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-284
FRONT-ECU
LICENCE
PLATE LAMP
RELAY
BOX
TAIL LAMP
RELAY
TAIL/STOP
LAMP
(LH)
TAIL/STOP
LAMP
(RH)
POSITION
LAMP
(LH)
(RH)
(LH)
(RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Tail lamps, Position Lamps and License Plate Lamps Circuit <LHD>
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-285
COMMENTS ON TROUBLE SYMPTOM
If the tail lamps, the position lamps or the licence
plate lamps do not illuminate, the wiring harness
connector(s), the bulb or the fuse may be defective
or burned out.
FRONT-ECU
LICENCE
PLATE LAMP
RELAY
BOX
TAIL LAMP
RELAY
TAIL/STOP
LAMP
(LH)
TAIL/STOP
LAMP
(RH)
POSITION
LAMP
(LH)
(RH)
(LH)
(RH)
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
Tail lamps, Position Lamps and License Plate Lamps Circuit <RHD>
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст