Mitsubishi Grandis. Manual — part 278

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-574

SUNROOF MOTOR ASSEMBLY

ON-VEHICLE SERVICE

CUSTOMIZE FUNCTION

M1549002500623

Using MUT-III adjusts the following function. The
programmed information is held even when the
battery is disconnected.

• Headlamp automatic-shutdown function

To prevent the headlamp from being left illuminated,

the headlamp is turned off automatically when
opening the driver’s door, if the ignition switch is
turned to the LOCK (OFF) position with the
lighting switch in the TAIL or HEAD position.

• Vehicle speed-dependent wiper function

With the windshield wiper switch in the intermittent

position, the intermittent duration changes
depending on the intermittent adjusting knob
position and the vehicle speed.

• Turn-signal lamp operation sound function

Synchronized with the hazard lamp and the turn

signal lamp, the buzzer sounds.

• Dimmer interior lamp control duration

Termin
al No.

Check item

Check condition

Normal condition

1

Earth

Always

0 V

2

Input from power window motor

−

−

3

Input from power window motor

−

−

4

Power supply

Power window relay: ON

System voltage

5

Output to power window motor

−

−

6

SWS communication line

Power window relay: ON

0 to 12 V (pulse signal)

7

Output to power window motor

−

−

8

Input from power window motor

−

−

AC312932AB

E-07

Termin
al No.

Check item

Check condition

Normal condition

1

System voltage (for motor)

Always

System voltage

2

Power supply from ignition switch
(IG2)

Ignition switch: ON

System voltage

3, 4

−

−

−

5

Earth

Always

0 V

6

Input from sunroof switch (close)

Sunroof switch: Close

0 V

7

−

−

−

8

Input from sunroof switch (open)

Sunroof switch: Open

0 V

9

−

−

−

10

SWS communication line (to
ETACS-ECU)

Always

0 to 12 V (pulse signal)

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-575

When the door is closed with the ignition switch

LOCK (OFF), the interior lamp is turned OFF
automatically in the specified time.

• Power window timer function duration

Even after turning LOCK (OFF) the ignition switch,

the power window can be operated for the
specified time.

• Power window main switch operation control

during power window timer activation

During power window timer activation, only the

driver’s power window can be operated, using the
power window main switch.

• Timer lock time after executing the keyless entry

unlock

If any door including a tailgate is not opened after

being unlocked with the keyless transmitter,
doors are locked automatically within the
specified time.

• Door-ajar warning function

Driving with any door, including a tailgate, not

properly closed sounds the buzzer to let the
driver know the door-ajar state.

• Rear wiper intermittent duration

When the rear wiper switch is turned ON, the rear

wiper operates in the intermittent action. When
the rear wiper switch is turned from OFF to ON
two cycles, the rear wiper makes continuous
operation regardless of the intermittent operation
duration setting.

• Operation duration of interior lamp

automatic-shutdown function

This function automatically turns OFF the interior

lamp after a specified time has elapsed, if the
interior lamp is ON with the ignition switch in the
LOCK (OFF) position.

• Power window lock operation on the driver's seat

This function enables the driver to control the power

windows other than the driver’s door power
window with the power window main switch,
when the power window lock switch incorporated
in the power window main switch is pressed.

• Wiper linked with washer function

When this function is active, the windshield wiper

operates if the washer switch is turned ON.

• Initialising all functions (Returning to the initial

condition)

All adjusting functions are returned to the settings at

the time of factory shipment.

NOTE: If item No.6 and 8 are both shown, they are

deleted by initialising all the functions. The
adjustment function item is displayed when the
smart entry system is reactivated after
initialisation of all the functions.

Item
No.

Items shown
on MUT-III
screen

Item

Adjustment items
shown on MUT-III
screen

Adjusting contents

2

H/L
AUTO-CUT

Headlamp
automatic-shutdo
wn function

W.FUNCTION(A)

With function: The automatic tail
lamp turn-off function with the
ignition switch OFF (LOCK) is
available.

W.FUNCTION(D)

With function: The automatic tail
lamp turn-off function with the
ignition switch OFF (LOCK) is not
available. (Initial setting)

W/O FUNCTION

Without function

4

SPEED SEN
WIP

Vehicle
speed-dependent
wiper function

W.FUNCTION

With function (Initial setting)

W/O FUNCTION

Without function

15

T/SIG.BUZZE
R

Turn-signal lamp
operation sound
function

W.FUNCTION

With function

W/O FUNCTION

Without function (the initial condition)

16

RM LMP TN
OFF

Dimmer interior
lamp control
duration

30s

30 seconds

15s

15 seconds (the initial condition)

7.5s

7.5 seconds

W/O FUNCTION

0 second (no delay action)

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-576

24

KEYLES
LOCK T

Timer lock time
after executing the
keyless entry
unlock

30s

30 seconds (the initial condition)

60s

1 minute

120s

2 minutes

180s

3 minutes

26

DOOR WARN
BUZ

Door-ajar warning
function

W.FUNCTION

With function (Initial setting)

W/O FUNCTION

Without function

CONTIN ACTION

Continuous operation

28

R.INT WIPER
T

Rear wiper
intermittent
duration

8s

8 seconds: Without continuous
operation (Initial setting)

4s(W SUCSSON)

4 seconds: With continuous
operation

8s(W SUCSSON)

8 seconds: With continuous
operation

16s(W SUCSSON)

16 seconds: With continuous
operation

CONTIN ACTION

Continuous operation (without the
intermittence)

4s

4 seconds: Without continuous
operation

16s

16 seconds: Without continuous
operation

30

RM/L
AUTO-CUT

Operation duration
of interior lamp
automatic-shutdo
wn function

3min.

3 minutes

30min.

30 minutes (the initial condition)

60min.

60 minutes

W/O FUNCTION

Without function

31

P/W LOCK
MODE

Power window
lock operation on
the driver's seat

ALL SEATS OPE

Driver can operate power windows
on all doors even when the power
window lock is ON (Initial setting).

ONLY DR SEAT

Operating seats other than the
driver's seat is prohibited when lock
is ON.

37

WIP SYCR
WASH

Wiper linked with
washer function

W.FUNCTION

With function (Initial setting)

W/O FUNCTION

Without function

39

TURN-SIGNA
L

Turn signal lamp
operation
condition
adjustment
function

IG-ON

Turn signal lamp can be operated
when the ignition switch is turned ON
(Initial setting).

IG-ACC

Turn signal lamp can be operated
when the ignition switch 1 is in ACC
or ON position.

Item
No.

Items shown
on MUT-III
screen

Item

Adjustment items
shown on MUT-III
screen

Adjusting contents

ON-VEHICLE SERVICE

SMART WIRING SYSTEM (SWS) USING SWS MONITOR

54C-577

NOTE:

.

•

Adjustment items other than the above will also be shown on MUT-III screen. However, they cannot be
reconfigured.

40

KEYLES
HAZARD

Keyless entry
hazard
answer-back
flashing pattern
adjustment
function

LOCK1,UNLOCK2

LOCK: Flash once, UNLOCK: Flash
twice (Initial setting)

LOCK1, UNLOCK0

LOCK: Flash once, UNLOCK: No
flash

LOCK0, UNLOCK2

LOCK: No flash, UNLOCK: Flash
twice

LOCK2, UNLOCK1

LOCK: Flash twice, UNLOCK: Flash
once

LOCK2, UNLOCK0

LOCK: Flash twice, UNLOCK: No
flash

LOCK0, UNLOCK1

LOCK: No flash, UNLOCK: Flash
once

NO BLINK

No flashing

Item
No.

Items shown
on MUT-III
screen

Item

Adjustment items
shown on MUT-III
screen

Adjusting contents