Mitsubishi Grandis. Manual — part 39
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-153
(2) Turn the ignition switch to the ON position.
(3) Voltage between terminal 4 and body earth
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 36.
NO :
Go to Step 34.
Step 34. C-217 power window relay connector
Q: Is the check result normal?
YES :
Go to Step 35.
NO :
Repair the connector.
1
4
5
3 2
7 6
8
AC301462
Connector F-02
(Harness side)
AD
AC310623
Connector: C-217
AB
3
4
5
1
2
Junction block side
<LHD>
Junction block (Front view)
AC310618
Connector: C-217
3
4
5
1
2
Junction block side
<RHD>
Junction block (Front view)
AB
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-154
Step 35. Check the wiring harness from F-02
power window sub switch (rear: LH) connector
terminal No.4 to C-217 power window connector
terminal No.4.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-155
NOTE:
Prior to the wiring harness inspection, check
intermediate connectors C-16, D-16 and junction
block connector C-202, and repair if necessary.
• Check the power supply line for open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
AC310624
Connector: C-202, C-217
AB
3
4
5
1
2
Junction block side
<LHD>
Junction block (Front view)
C-217
C-202
C-217
C-202
Harness side
AC310619
Connector: C-202, C-217
AB
3
4
5
1
2
Junction block side
<RHD>
Junction block (Front view)
C-217
C-202
C-217
C-202
Harness side
AC310209
Connector: F-02
F-02(B)
AB
Harness side
AC310615
AE
Connector: C-16 <LHD>
AC310631 AD
Connector: C-16 <RHD>
AC310207
AB
Connector: D-16
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-156
Step 36. Connector check: F-01 power window
motor (rear: LH) connector
Q: Is the check result normal?
YES :
Go to Step 37.
NO :
Repair the connector.
Step 37. Check the wiring harness from F-01
power window motor (rear: LH) connector
terminal Nos.1 and 3 to F-02 power window sub
switch (rear: LH) connector terminal Nos.5 and 7.
• Check the input and output lines for open or short
circuit.
Q: Is the check result normal?
YES :
Go to Step 38.
NO :
Repair the wiring harness.
Step 38. Retest the system.
After the power window sub switch (rear: LH) is
replaced, check that the rear left door power window
can be operated by the power window sub switch
(rear: LH).
(1) Replace the power window sub switch (rear: LH).
(2) Check that the rear left door power window can
be operated by the power window sub switch
(rear: LH).
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the power window motor (rear: LH).
AC310209
Connector: F-01
F-01(B)
AC
Harness side
AC310210
AC310210
Connectors: F-01, F-02
F-02(B)
AB
Harness side
F-01(B)
F-02
F-01
Harness side
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст