Mitsubishi Grandis. Manual — part 137
TROUBLESHOOTING
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-10
NOTE: In addition to the function-specific
diagnostic menu, a service data menu is available
for SWS monitor service data to check all items
for each ECU.
• The switch condition does not meet the service
data display: Input signal system related to
defective functions
• The switch condition meets the service data
display: Output signal system related to defective
functions
6. Check of input signal circuit system
Check relevant switch, sensor, input signal-side
ECU and their wiring harness and connector.
7. Check of output signal circuit system
Check an output signal-side ECU, electrical load
components and their wiring harness and
connector.
HOW TO CONNECT THE SWS MONITOR
M1549014800513
CAUTION
Always turn the ignition switch to the "LOCK"
(OFF) position before connecting or
disconnecting the SWS monitor and the MUT-III.
HOW TO CONNECT THE SWS
COMMUNICATION LINE <SPECIAL TOOL
SWS MONITOR HARNESS (FOR
COLUMN-ECU) MB991812>
1. Remove the steering column cover.
2. Remove the steering column switch connector.
3. Connect special tool SWS monitor harness (for
column-ECU) MB991812.
<WHEN CONNECTING THE DIAGNOSIS
CONNECTOR BY USING THE
INTERMEDIATE WIRES FOR SWS
MONITOR CUSTOMISATION>
1. Connect the special tool Intermediate wires
(MB991960) for SWS monitor customisation to
the special tool MUT-III main harness A
(MB991910).
2. Connect the MUT-III main harness A (with the
intermediate wires) to the special tool V.C.I.
(MB991824) .
3. Connect the intermediate wires for SWS monitor
customisation to the the diagnosis connector and
the SWS monitor cartridge.
HOW TO ESTABLISH COMMUNICATION
BETWEEN DOORS
Connect the MUT-III and the SWS monitor to the
SWS communication lines. Refer to .
1. Select "DOOR CNT.COM." on the MUT-III.
2. Disconnect the SWS monitor cartridge from the
SWS communication lines without switching off
the MUT-III and the V.C.I.
AC103262AE
Column switch
connector
Column switch
connector at
harness side
MB991812
AC311046
AB
Diagnosis connector
MB991806
(SWSmonitor
cartridge)
MB991960
MB991824
MB991910
TROUBLESHOOTING
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-11
3. Connect special tool SWS monitor harness (for
column-ECU) MB991812 to special tool adapter
harness for door communication MB991896.
4. Connect special tool Probe harness MB991822 to
special tool adapter harness for door
communication MB991896 assembled in step 1.
5. Confirm that all the harnesses are connected.
Then insert the probe of special probe harness
MB991822 to each female connector terminal on
special tool adapter harness for door
communication MB991896 by backprobing.
NOTE: For the connectors and their terminal
numbers on the door communication line for the
probe to insert, refer to the reference table.
Reference table of connectors and their terminal numbers on door communication
line
Insert the probe of the probe harness to each female
connector terminal on the door communication line
by backprobing.
<LH DRIVE VEHICLES>
AC103783AC
MB991812
MB991896
MB991822
Connector name
Connector number
Terminal
No.
Intermediate connector
Instrument panel wiring
harness and front door wiring
harness (RH) combination
C-14 (Front door wiring
harness (RH) side)
5
Instrument panel wiring
harness and floor wiring
harness combination
C-16 (Instrument panel wiring
harness side)
29
Instrument panel wiring
harness and front door wiring
harness (LH) combination
C-27 (Front door wiring
harness (LH) side)
3
Floor wiring harness and rear
door wiring harness (RH)
combination
D-03 (Floor wiring harness
side)
8
Floor wiring harness and rear
door wiring harness (LH)
combination
D-16 (Floor wiring harness
side)
8
Power window main switch
F-05
11
Power window sub switch (front RH)
F-15
6
Power window sub switch (rear RH)
F-18
6
Power window sub switch (rear LH)
F-02
6
TROUBLESHOOTING
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-12
AC310616
AE
Connectors: C-14, C-16
C-16
C-14
C-14
C-16
<LHD>
AC310613
Connector: C-27 <LHD>
AJ
AC310633 AB
Connector: D-03 <LHD>
D-03(B)
AC310207
AB
Connector: D-16
AC310209
Connector: F-02
F-02(B)
AB
Harness side
AC311150
AB
Connector: F-05
Harness side
<LHD>
10
1
6
14
5
12
13
4
11
7
2
3
8
9
F-05(B)
AC311147
AB
Connector: F-15
<LHD>
Harness side
F-15(B)
AC310216
Connector: F-18
F-18(B)
AB
Harness side
TROUBLESHOOTING
SMART WIRING SYSTEM (SWS) USING SWS MONITOR
54C-13
<RH DRIVE VEHICLES>
Connector name
Connector number
Terminal
No.
Intermediate connector
Instrument panel wiring
harness and front door wiring
harness (RH) combination
C-14 (Front door wiring
harness (RH) side)
3
Instrument panel wiring
harness and floor wiring
harness combination
C-16 (Instrument panel wiring
harness side)
29
Instrument panel wiring
harness and front door wiring
harness (LH) combination
C-27 (Front door wiring
harness (LH) side)
5
Floor wiring harness and rear
door wiring harness (RH)
combination
D-03 (Floor wiring harness
side)
8
Floor wiring harness and rear
door wiring harness (LH)
combination
D-16 (Floor wiring harness
side)
8
Power window main switch
F-05
11
Power window sub switch (front LH)
F-26
6
Power window sub switch (rear RH)
F-18
6
Power window sub switch (rear LH)
F-02
6
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст