Mitsubishi Grandis. Manual — part 101
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-401
DIAGNOSTIC PROCEDURE
Step 1. Connector check: F-11 door lamp (front:
LH), F-22 door lamp (front: RH) connector, F-09
door lamp (rear: LH), F-25 door lamp (rear: RH)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-402
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the defective connector.
Step 2. Check the bulbs of the door lamp.
Check that the door lamp bulbs are not burned out.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Replace the door lamp bulb.
AC310209 AE
Connector: F-09
AC311150
AE
Connector: F-11
<LHD>
AC310211
AG
Connector: F-11 <RHD>
AC311147
AG
Connector: F-22 <LHD>
AC310213
AF
Connector: F-22 <RHD>
AC310216
AF
Connector: F-25
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-403
Step 3. Connector check: D-17 door switch (front:
LH), D-02 door switch (front: RH) connector, D-13
door switch (rear: LH) connector, D-08 door
switch (rear: RH) connector
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-404
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the defective connector.
Step 4. Check the door switch.
Check the door switch, which corresponds to the
defective door lamp (Refer to GROUP 42
− Door
Q: Is the check result normal?
YES :
Go to Step 5.
NO :
Replace the door lamp bulb.
AC310634AB
Harness side
Connectors: D-02, D-08 <LHD>
D-02, D-08
D-02
D-08
AC310206
AB
Harness side
Connectors: D-02, D-08 <RHD>
D-02, D-08
D-02
D-08
AC310208
AC
Harness side
Connectors: D-13, D-17
D-13
D-17
D-13, D-17
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст