Mitsubishi Grandis. Manual — part 89
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-353
intermediate connector C-15 <RH drive vehicles>,
C-16 <LH drive vehicles>, G-21 <LH drive vehicles>
and junction block connector C-201, and repair if
necessary.
• Check the output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 12.
NO :
Repair the wiring harness.
Step 12. Connector check: C-221 ETACS-ECU
connector
Q: Is the check result normal?
YES :
Go to Step 13.
NO :
Repair the defective connector.
AC310626
Connector: C-221
Junction block (Rear view)
<LHD>
AC
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
Harness side
C-221(GR)
AC310620
Connector: C-221
Junction block
(Rear view)
<RHD>
AC
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
Harness side
C-221(GR)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-354
Step 13. Check the wiring harness between C-213
rear fog lamp relay connector terminal No.2 and
C-221 ETACS-ECU connector terminal No.74.
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-355
NOTE: Prior to the wiring harness inspection, check
junction block connector C-201, and repair if
necessary.
• Check the output lines for open circuit.
Q: Is the check result normal?
YES :
Go to Step 14.
NO :
Repair the wiring harness.
Step 14. Retest the system.
Check that the rear fog lamps illuminate normally.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00
− How to
Cope with Intermittent Malfunction
NO :
Replace the ETACS-ECU.
AC310624
Connectors: C-201, C-213 <LHD>
AR
Junction block (Front view)
C-213
Harness side
C-201
C-201
Junction block side
C-213
AC310619
Connectors: C-201, C-213 <RHD>
AR
Junction block (Front view)
C-213
Harness side
C-201
C-201
Junction block side
C-213
AC310626
Connector: C-221
Junction block (Rear view)
<LHD>
AC
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
Harness side
C-221(GR)
AC310620
Connector: C-221
Junction block
(Rear view)
<RHD>
AC
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
Harness side
C-221(GR)
SYMPTOM PROCEDURES
SMART WIRING SYSTEM (SWS) NOT USING SWS MONITOR
54B-356
Inspection Procedure O-3: Any of the front fog lamps does not illuminate.
CAUTION
Whenever the ECU is replaced, ensure that the
input and output signal circuits are normal.
COMMENTS ON TROUBLE SYMPTOM
If any of the front fog lamps do not illuminate, the
wiring harness connector(s), the bulb or the fuse may
be defective or burned out.
POSSIBLE CAUSES
• Burned-out front fog lamp bulb
• Damaged harness wires and connectors
Wire colour code
B : Black LG : Light green G : Green L : Blue W : White Y : Yellow SB : Sky blue
BR : Brown O : Orange GR : Gray R : Red P : Pink V : Violet
RELAY
BOX
FRONT FOG
LAMP RELAY
FRONT-ECU
FRONT
FOG LAMP
(LH)
FRONT
FOG LAMP
(RH)
FUSIBLE
LINK
26
Front Fog Lamp Circuit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст