Mitsubishi Grandis. Manual — part 319
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55-161
DIAGNOSIS
Step 1. Connector check: C-215 rear blower
motor connector
Q: Is the check result normal?
YES :
Go to Step 2.
NO :
Repair the connector.
Step 2. Check the rear blower relay
Refer to
.
Q: Is the check result normal?
YES :
Go to Step 3.
NO :
Replace the rear blower relay.
Step 3. Connector check: C-15 intermediate
connector
Q: Is the check result normal?
YES :
Go to Step 4.
NO :
Repair the connector.
Step 4. Voltage measurement at C-15
intermediate connector.
(1) Disconnect the connector, and measure at the
wiring harness side.
(2) Turn the ignition switch to the ON position.
(3) Disconnect A/C-ECU connector C-104 and earth
terminal 56.
(4) Measure the voltage between terminal 1 and
body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 11.
NO :
Go to Step 5.
AC310618
Connector: C-215 <RHD>
AH
Junction block side
Junction block (Front view)
AC310628AE
Connector: C-15 <RHD>
AC310628AE
Connector: C-15 <RHD>
AC310631AH
Connector: C-104 <RHD>
Harness side
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
AC310507
Connector C-15
BE
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55-162
Step 5. Voltage measurement at C-215 rear
blower relay connector.
(1) Remove the relay, and measure at the relay block
side.
(2) Turn the ignition switch to the "ON" position.
(3) Voltage between terminal 3 and body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 7.
NO :
Go to Step 6.
Step 6. Check the wiring harness between C-215
rear blower relay connector terminal No.3 and
the ignition switch (IG2).
NOTE:
Prior to the wiring harness inspection, check junction
block connectors C-202, C-205 and joint connector
C-01, and repair if necessary.
• Check the rear blower relay power supply line for
open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
AC310618
Connector: C-215 <RHD>
AH
Junction block side
Junction block (Front view)
AC310507BF
Connector C-215
(Junction block side)
AC310619
Connectors: C-202, C-205, C-215 <RHD>
AN
Junction block (Front view)
C-205
C-202
C-205
Harness side
C-202
Harness side
C-215
Junction block side
C-215
AC310631AE
Connector: C-01 <RHD>
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55-163
Step 7. Voltage measurement at C-215 rear
blower relay connector.
(1) Remove the relay, and measure at the relay block
side.
(2) Turn the ignition switch to the "ON" position.
(3) Voltage between terminal 4 and body earth.
OK: System voltage
Q: Is the check result normal?
YES :
Go to Step 9.
NO :
Go to Step 8.
Step 8. Check the wiring harness between C-215
rear blower relay connector terminal No.4 and
the fusible link (30).
NOTE:
Prior to the wiring harness inspection, check
intermediate connector C-125 and junction block
connector C-201, and repair if necessary.
• Check the rear blower relay power supply line for
open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
AC310618
Connector: C-215 <RHD>
AH
Junction block side
Junction block (Front view)
AC310507
Connector C-215
(Junction block side)
BG
AC310619
Connectors: C-201, C-215 <RHD>
AO
Junction block (Front view)
C-215
Harness side
C-201
C-201
Junction block side
C-215
AC310628AB
Connector: C-125 <RHD>
TROUBLESHOOTING
HEATER, AIR CONDITIONER AND VENTILATION
55-164
Step 9. Check the wiring harness between C-215
rear blower relay connector terminal No.2 and
C-104 A/C-ECU connector terminal No.56.
NOTE: Prior to the wiring harness inspection, check
junction block connector C-201, and repair if
necessary.
• Check the rear blower relay power supply line for
open circuit.
Q: Is the check result normal?
YES :
Go to Step 10.
NO :
Repair the wiring harness.
Step 10. Check the wiring harness between C-215
rear blower relay connector terminal No.4 and
C-15 intermediate connector terminal No.1.
NOTE: Prior to the wiring harness inspection, check
junction block connector C-201, and repair if
necessary.
• Check the rear blower relay power supply line for
open circuit.
Q: Is the check result normal?
YES :
The trouble can be an intermittent
malfunction (Refer to GROUP 00, How to
Cope with Intermittent Malfunction
NO :
Repair the wiring harness.
AC310631AH
Connector: C-104 <RHD>
Harness side
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
AC310619
Connectors: C-201, C-215 <RHD>
AO
Junction block (Front view)
C-215
Harness side
C-201
C-201
Junction block side
C-215
AC310628AE
Connector: C-15 <RHD>
AC310619
Connectors: C-201, C-215 <RHD>
AO
Junction block (Front view)
C-215
Harness side
C-201
C-201
Junction block side
C-215
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст