Mitsubishi Outlander (2013+). Manual — part 94
INSTRUMENT PANEL AND FLOOR CONSOLE
INTERIOR
52A-3
INSTRUMENT PANEL AND FLOOR CONSOLE
M2520001001462
The instrument panel offers the following features:
• The division unit of each part has been enlarged,
also the gap and level difference between the
instrument panel has been minimised to achieve
the delicate quality.
ACC00465
Key box
AB
Front floor console
Rear floor console
Console cup holder
Armrest
Instrument centre panel
Decoration panel
Key box
Console cup holder
Accessory
socket
USB adapter
Glove box assembly
SEAT
INTERIOR
52A-4
• A lamp has been added to the large-sized glove
box with card holder have been installed for the
improved convenience.
• To the lower part of centre panel, a centre lower
tray that can store up to 6 CDs has been installed
with which jumping out or dropping of stored
items during abrupt start is prevented.
• A console cup holder that can store two plastic
bottles or brick packs has been installed in the
front floor console.
• Rear console tray that can store a mobile phone,
cards, pens, and others has been installed to the
rear floor console, and additionally, rear floor con-
sole box that can store 10 CDs or 7 DVDs has
been installed to under the rear floor console.
• Simple and clear form by reducing separations on
the instrument panel.
• Soft pads attached around the upper part, thus
improving the sense of touch.
• Ergonomic layout where controls are arranged at
the centre of the dash board and face towards
the driver.
• High grossed black finish on the instrument cen-
tre panel.
• Decoration panels, which underline sportiness
(silver carbon) or luxury (wood grain tone), are
arranged optimally in the vicinity of front passen-
ger. <wood grain tone: optional equipment>
• The engine can be started and power supply to
accessories can be turned on and off in the con-
ventional manner by inserting a keyless operation
key into the key slot on the instrument panel cen-
tre lower (upper part of the front floor console).
SEAT
FRONT SEAT
M2520004001494
The front seat offers the following advantages:
• The seats are designed to be adjustable in the
reclining and sliding directions.
• Headrestraints with a vertical adjustment mecha-
nism have been adopted.
• The seat height adjustment function has been
introduced to the driver’s seat. This function
raises and lowers the seat cushion together with
the seatback, thus the driver's waist position in
relation to the seatback is always kept constant,
ACB05051 AB
Seatback pocket
Headrestraint
Seatback
frame
Cross frame
<Front/rear collision protection seat
mechanism>
Headrestraint
adjustment
Reclining adjustment
Height adjustment
Slide adjustment
SEAT
INTERIOR
52A-5
resulting in the improved riding comfort. By the
height adjustment amount up to 45 mm, the more
optimised driving position can be adjusted. The
pump type seat height adjustment lever has been
adopted for convenient use.
• For the driver's seat, 4 WAY power seat has been
adopted for better convenience. <Vehicles with
power seat>
• The driver's seat and passenger's seat have
seatback pockets for better convenience.
• The frontal and rear-end collision protection seat
structure (backward layout of seatback frame and
optimisation of headrestraint position) has been
adopted to enhance safety during a collision at
lower vehicle speed. The cross frame has been
installed below the seat cushion to reduce the for-
ward travel distance of the passengers during a
frontal collision and has enhance safety.
• Glared fabric has been newly developed based
on fine and high-quality fabric has been adopted,
thus offering tailor-made smoothness.
• Lateral holding of the seatback has been
improved.
• The head restraints is in height than the prede-
cessor, thus enhancing safety.
• The heated seat switch is relocated from the seat
to the front floor console, thus improving ease of
operation. <Vehicles with heated seats>
SECOND SEAT
M2520005000353
The second seats offer the following features.
ACC00464 AB
<Dual-action folding structure>
Reclining
adjustment
Cup holder
: ISO-FIX child seat fixing bar positions
: Tether anchorage positions
Dual-action
folding structure
SEAT
INTERIOR
52A-6
• The dual-action folding mechanism of the second
seat allows to flip up the seat cushion and then
fold the seatback with easy operation. Due to
this, a lowered flat cargo space can be achieved
without any compromise to seating comfort.
• Reclining adjustment mechanisms have been
adopted to improve comfort.
• Armrests with a cup holder have been installed to
improve convenience.
• Headrestraints have been installed to the second
seats.
• The ISO-FIX child seat fixing bar is installed as
standard on the outer seats, and the tether
anchorage on outer seats, improving the versatil-
ity of child seat installation.
• The structure of the second seat frame has been
optimised and the centre seat belt retractor is
mounted on the roof, thus reducing its weight.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст