Mitsubishi Outlander (2013+). Manual — part 235
ACC00417
OK
KOS/IMMO/Keyless
Special Function
ENG Key Code
&Chassis No/
VIN Reg
<When Engine-ECU
is replaced (Vehicles
without KOS)>
<When ETACS-ECU
or KOS-ECU are
replaced>
System Select
Coding
OK
OK
AB
System Select
KOS/IMMO/Keyless
Engine Key Code
Registration Completed
Chassis No. Registration
Completed
Result of Chassis No.
Registration
Chassis No. Registration
Confirmation
Engine Chassis No.
Registration
Engine Chassis No.
Registration
Confirmation
OK
OK
OK
Engine Chassis No.
Registration
Completed
Result of Engine
Chassis No.
Registration
OK
<When Engine-ECU
is replaced (Vehicles
with KOS)>
Coding
OK
OK
System Select
MPII/GDI/DIESEL
Chassis No. Registration
Completed
Result of Chassis No.
Registration
Chassis No. Registration
Confirmation
Chassis No. /VIN Writing
Chassis No. /VIN Writing
<When ETACS-ECU
is replaced>
Coding
OK
OK
System Select
ETACS
Chassis No. Registration
Completed
Result of Chassis No.
Registration
Chassis No. Registration
Confirmation
Chassis No. /VIN Writing
PRECAUTIONS BEFORE SERVICE
GENERAL
00-22
NOTE:
.
•
Chassis number writing of the OSS ECU and ESL ECU is described in "Keyless Operation System
(KOS)". (Refer to GROUP 42B
−
On-vehicle Service <OSS ECU> .)
•
Perform the variant coding of the engine-ECU when the chassis No. or the vehicle identification number is
registered to the engine-ECU.
PRECAUTIONS BEFORE SERVICE
GENERAL
00-23
ENGINE KEY CODE AND CHASSIS
NUMBER (CHASSIS NO.) REGISTRA-
TION STEPS FOR THE ENGINE-ECU
<VEHICLES WITHOUT KOS>
CAUTION
• Check that diagnosis code No.P0603 "EEP-
ROM fail" is not set. When diagnosis code No.
P0603 "EEPROM fail" is set, the engine-ECU
cannot store engine key code and chassis No.
even if the engine key code and chassis No.
are registered. If this diagnosis code is set,
troubleshoot the engine-ECU and repair, and
then register the engine key code and chassis
No. to the engine-ECU.
•
ACB05017
MB992747, MB992748, MB991827
MB992744, MB991824
AB
MB992745, MB991910
Diagnosis connector
Before connecting or disconnecting the
M.U.T.-III, turn the ignition switch to the
"LOCK" (OFF) position.
Connect the M.U.T.-III to the 16-pin diagnosis con-
nector as follows.
NOTE: For details on how to use the M.U.T.-III, refer
to the "M.U.T.-III User's Manual."
1. Ensure that the ignition switch is at the "LOCK"
(OFF) position.
2. Start up the personal computer.
3. Connect special tool V.C.I.-Lite USB cable
(MB992747/MB992748) or M.U.T.-III USB cable
(MB991827) to V.C.I.-Lite (MB992744) or V.C.I.
(MB991824) and the personal computer.
4. Connect V.C.I.-Lite main harness A (MB992745)
or M.U.T.-III main harness A (MB991910) to the
V.C.I.-Lite or V.C.I.
5. Connect the V.C.I.-Lite main harness A or
M.U.T.-III main harness A to the diagnosis
connector of the vehicle.
NOTE: When the V.C.I.-Lite is connected to the
diagnosis connector, the V.C.I.-Lite indicator lamp
will be illuminated in a green colour.
6. Turn the V.C.I. power switch to the "ON" position.
<When using the V.C.I.>
NOTE: When the V.C.I. is energized, the V.C.I.
indicator lamp will be illuminated in a green col-
our.
7. Start the M.U.T.-III system on the personal
computer and turn the ignition switch to the "ON"
position.
8. Select "KOS/IMMO/Keyless" button from the
"System Select" screen. Then, select the
applicable option code item and push the OK
button.
• The display of "Special Function" screen
changes, depending on the contents of the
option. For vehicles with KOS, select
"KOS&Immobi." For vehicles without KOS, select
"Immobi&Keyless."
9. Select "Special Function" on the next screen.
AC801055
Option: When Immobi & Keyless is selected
AD
KOS/IMMO/Keyless
ENG Key Code&
Chassis No./VIN Reg
10.Select "ENG Key Code&Chassis No./VIN Reg."
from the "Special Function" screen.
AC509803
AC
OK button
KOS/IMMO/Keyless
ENG Key Code&Chassis No./VIN Reg
Key Code Registration to Engine-ECU
11.Push the OK button after "Key Code Registration
to Engine-ECU" is displayed.
PRECAUTIONS BEFORE SERVICE
GENERAL
00-24
12.Push the OK button after "Completed. Press the
OK button and move to Chassis No./VIN writing
function." is displayed.
AC700604
*****************
*****************
AB
13.Enter the Chassis No./VIN of registering vehicle
and push the OK button.
14.Push the OK button after "Chassis No./VIN
Writing will start. Are you sure?" is displayed.
15.Return to the previous screen and "In Progress" is
displayed at the lower-left corner on the screen.
16.Push the OK button after "Completed." is
displayed.
AC700605
*****************
*****************
AD
Chassis No./VIN
Result of Chassis No./VIN Writing
17.Chassis No./VIN writing result is displayed.
18.Complete the M.U.T.-III.
19.Disconnecting the M.U.T.-III is the reverse of the
connecting sequence, making sure that the
ignition switch is at the "LOCK" (OFF).
20.Push the OK button after "Completed." is
displayed.
21.Terminate the M.U.T.-III.
22.Turn the ignition switch to the LOCK (OFF)
position and then disconnect the M.U.T.-III.
CHASSIS NUMBER (CHASSIS NO.) REG-
ISTRATION STEPS FOR THE
ENGINE-ECU <VEHICLES WITH KOS>
CAUTION
• Check that diagnosis code No.P0603 "EEP-
ROM fail" is not set. When diagnosis code No.
P0603 "EEPROM fail" is set, the engine-ECU
cannot store engine key code and chassis No.
even if the engine key code and chassis No.
are registered. If this diagnosis code is set,
troubleshoot the engine-ECU and repair, and
then register the engine key code and chassis
No. to the engine-ECU.
•
ACB05017
MB992747, MB992748, MB991827
MB992744, MB991824
AB
MB992745, MB991910
Diagnosis connector
Before connecting or disconnecting the
M.U.T.-III, turn the ignition switch to the
"LOCK" (OFF) position.
Connect the M.U.T.-III to the 16-pin diagnosis con-
nector as follows.
NOTE: For details on how to use the M.U.T.-III, refer
to the "M.U.T.-III operation manual."
1. Start up the personal computer.
2. Connect special tool V.C.I.-Lite USB cable
(MB992747/MB992748) or M.U.T.-III USB cable
(MB991827) to V.C.I.-Lite (MB992744) or V.C.I.
(MB991824) and the personal computer.
3. Connect V.C.I.-Lite main harness A (MB992745)
or M.U.T.-III main harness A (MB991910) to the
V.C.I.-Lite or V.C.I.
4. Connect the V.C.I.-Lite main harness A or
M.U.T.-III main harness A to the diagnosis
connector of the vehicle.
PRECAUTIONS BEFORE SERVICE
GENERAL
00-25
NOTE: When the V.C.I.-Lite is connected to the
diagnosis connector, the V.C.I.-Lite indicator lamp
will be illuminated in a green colour.
5. Turn the V.C.I. power switch to the "ON" position.
<When using the V.C.I.>
NOTE: When the V.C.I. is energized, the V.C.I.
indicator lamp will be illuminated in a green col-
our.
6. Start the M.U.T.-III system on the personal
computer and turn the ignition switch to the "ON"
position.
7. Select "MPI/GDI/DIESEL" button from the
"System Select" screen.
ACB05854
POWERTRAIN
MPI/GDI/DIESEL
8. Select "Coding" on the next screen.
ACB05856
POWERTRAIN
MPI/GDI/DIESEL
Coding
AB
Chassis No./VIN Writing
Chassis No./VIN Information
9. Select "Chassis No./VIN Writing" screen.
ACB05857
Coding
MPI/GDI/DIESEL
Chassis No./VIN Writing
Select equipment
Please select appropriate equipment.
With immobilizer
(except OSS equipped model)
Without immobilizer or OSS
equipped model
AB
OK button
10.Select whether the vehicle is equipped with
immobilizer system or not.
• For vehicles with KOS, select "With immobilizer
(except OSS equipped model)".
• For vehicles without KOS, select " Without immo-
bilizer or OSS equipped model".
ACB05859
Coding
MPI/GDI/DIESEL
Chassis No./VIN Writing
OK button
AC
Current Chassis No./VIN
New Chassis No./VIN
11.Enter the chassis number in the New Chassis No.
frame. Confirm the number and press the OK
button.
ACB05860
Chassis No./VIN Writing
Chassis No./VIN Writing will start.
Are you sure?
VIN Writing
AB
OK button
12.Following the instruction on the screen, press the
OK button to execute the chassis number writing.
ACB05861
Chassis No./VIN Writing
Completed.
OK button
AB
13.Push the OK button after "Completed." is
displayed.
ACB05862
MPI/GDI/DIESEL
Coding
Chassis No./VIN Writing
Chassis No.
AB
Chassis No./VIN
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст