Mitsubishi Outlander (2013+). Manual — part 79

SUNROOF

BODY

42A-35

The electric sliding glass sunroof with tilt-up mecha-
nism has been adopted as an option. This sunroof
has the following characteristics:

• A lightweight sunroofs has been adopted.

• The sunroof tilts up for approximately 30 mm to

improve ventilation performance.

• The integrated switch allows for all slide open-

ing/closing, tilt up/down, and stop operations. All
operations are available at one touch.

• If external force is applied during slide closing or

tilt down operations that obstructs operations, the
sunroof lid glass will move in the reverse direc-
tion.

DESCRIPTION OF CONSTRUCTION AND
OPERATION

SAFETY MECHANISM

• If any obstacle such as a hand or a head is

detected to be pinched during a sunroof lid glass
closing operation, the sunroof lid glass is opened
by approximately 200 mm or more.

• During the sunroof lid glass closing operation, by

continuing the sunroof close switch operation, the
sunroof can be forcibly closed without activating
the safety mechanism even when the obstacle is
detected to be pinched.

• During the safety mechanism activation, when

the sunroof close switch is operated, the sunroof
lid glass stops. By continuing the close switch
operation, the sunroof lid glass can be forcibly
closed without activating the safety mechanism
even when the obstacle is detected to be
pinched.

SUNROOF MOTOR ASSEMBLY

The sunroof motor assembly, which consists of the
motor main body, drive gear, and sunroof ECU, is
installed in front of the housing.

AC505239

AC505240

AC506511AB

Sunroof switch

Open switch

Close/down switch

Tilt-up switch

ACB05550AB

Sunroof ECU

Drive gear

Sunroof motor

SUNROOF

BODY

42A-36

SUNROOF-ECU

The sunroof-ECU incorporates a microcomputer and
controls motor operations with the sunroof switch
signals, depending on various conditions.

AC700720

ZC604430

AC609032

ZC604430

M

AB

ETACS-ECU

EEPROM

5

4

3

2

1

10

9

8

7

6

10

6

7

1

5

4

2

Open switch

Tilt-up switch

Close/Tilt-down
switch

Sunroof switch

Ignition
switch

Sunroof motor assembly

Motor

Sensor

Driver

circuit

3

Sunroof-ECU

LOOSE PANELS

BODY

42A-37

LOOSE PANELS

M2420000200418

The front end side panel under the engine compart-
ment absorbs impact energy during frontal collision
more effectively than the predecessor. In addition, an
impact-absorbing bumper minimises the risk of injury
to pedestrians, in particular to legs and head.

CUSTOMISE FUNCTION

M2420002500880

By operating the M.U.T.-III ETACS system or MMCS,
the following functions can be customised. The pro-
grammed information is held even when the battery
is disconnected.

ACC00273AB

Front end side panel

Front bumper reinforcement A

Front bumper reinforcement B

CUSTOMISE FUNCTION

BODY

42A-38

Adjustment
item (M.U.T.-III
display)

Adjustment item

Adjusting content
(M.U.T.-III display)

Adjusting content

Hazard answer
back

Adjustment of the
number of keyless
hazard warning
lamp answer back
flashes

Lock:1, Unlock:2

LOCK: Flashes once, UNLOCK: Flashes
twice (initial condition)

Lock:1, Unlock:0

LOCK: Flashes once, UNLOCK: No flash

Lock:0, Unlock:2

LOCK: No flash, UNLOCK: Flash twice

Lock:2, Unlock:1

LOCK: Flash twice, UNLOCK: Flash once

Lock:2, Unlock:0

LOCK: Flash twice, UNLOCK: No flash

Lock:0, Unlock:1

LOCK: No flash, UNLOCK: Flash once

Lock:0, Unlock:0

No function

Auto door
unlock

Adjustment of the
auto door unlock
function

Disabled

Without function (initial condition)

Always (P pos)

With function: Operates when the shift
lever or the selector lever is moved to the
P position.

Always(Lock pos)

With function: Operates when the ignition
switch is moved to the LOCK (OFF)
position.

Door unlock
mode

Adjustment of
power door locks
with selective
unlocking

All Doors Unlock

Without function: The first operation of
keyless entry system or unlock operation
by KOS unlocks all doors (initial condition).

Dr Door Unlock

With function: The first operation of
keyless entry system or unlock operation
by KOS unlocks the driver's door only, and
the second unlock operation within 2
seconds after that unlocks all doors.

Timer lock timer Timer lock period

adjustment

30 sec.

30 seconds (initial condition)

60 sec.

60 seconds

120 sec.

120 seconds

180 sec.

180 seconds

Multi mode

Multi-mode keyless
entry function
customisation
<Vehicles with
electric retractable
remote controlled
door mirrors>

Disable

No function

D/M: O&C

Door mirror fold/unfold operation only
(initial condition)