Mitsubishi Montero Sport (2004+). Manual — part 483
SUNROOF ASSEMBLY
TSB Revision
BODY
42-187
NOTE: After inspecting junction block connector D-14 and
intermediate connector E-42 inspect the wire. If junction block
connector D-14 or intermediate connector E-42 is damaged,
repair or replace it. Refer to GROUP 00E
, Harness
Connector Inspection. Then go to Step 11.
Q: Are there any damaged harness wires between
ETACS-ECU connector D-11 (terminal No.9), D-26
(terminal No.23) and driver's door switch connectors
E-33 (terminal No.2), front passenger’s side door switch
connector E-46 (terminal No.2)?
YES : Repair or replace the harness wire, then go to Step11.
NO : Replace the ETACS-ECU and then go to Step11.
STEP 9. Check ETACS-ECU connector D-11 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is ETACS-ECU connector D-11 good condition?
YES : Go to Step 10.
NO : Repair or replace the damaged components. Refer to
, Harness Connector inspection.
STEP 10. Check the harness wire between ETACS-ECU
connector D-11 (terminal No.3) and ignition switch.
AC201084
JUNCTION
BLOCK (REAR)
D-11
COMPONENT SIDE
AB
CONNECTOR: D-11
AC201941
M
3
1
4
2
CONNECTORS: D-08, D-11
AC
D-11
D-08
D-08 COMPONENT SIDE
D-11 COMPONENT SIDE
SUNROOF ASSEMBLY
TSB Revision
BODY
42-188
NOTE: After inspecting junction block connector D-08 inspect
the wire. If junction block connector D-08 is damaged, repair or
replace it. Refer to GROUP 00E
, Harness Connector
Inspection. Then go to Step 11.
Q: Are ETACS-ECU connector D-11 and ignition switch in
good condition?
YES : Go to step 11.
NO : Repair or replace the harness wire. Refer to GROUP
00E
, Harness Connector inspection.
STEP 11. Retest the system.
Q: Does the sunroof timer function operate normally?
YES : The procedure is complete.
NO : Return to Step 1.
SUNROOF ASSEMBLY
TSB Revision
BODY
42-189
INSPECTION PROCEDURE 5: Safety Mechanism does not Function.
SUNROOF-
ECU
JUNCTION
BLOCK
JUNCTION
BLOCK
FUSIBLE
LINK
8
Sunroof-ECU Power Supply for Safety Mechanism and Ground Circuit
AC309309AB
C-01
CONNECTOR: C-01
AC004314 AH
CONNECTOR: D-02
JUNCTION
BLOCK (FRONT)
D-02
SUNROOF ASSEMBLY
TSB Revision
BODY
42-190
.
CIRCUIT OPERATION
The power for the safety mechanism circuit in the
sunroof-ECU is supplied from fusible link number 8.
.
TECHNICAL DESCRIPTION (COMMENT)
The cause may be a malfunction of the sunroof-ECU
power supply for safety mechanism circuit system or
of the ground circuit system.
.
TROUBLESHOOTING HINTS
• Malfunction of the sunroof-ECU
• Damaged harness wires or connectors
DIAGNOSIS
STEP 1. Check sunroof-ECU connector E-07 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is sunroof-ECU connector E-07 damaged?
YES : Repair or replace the damaged components. Refer to
GROUP 00E
, Harness Connector
Inspection. Then go to Step 5.
NO : Go to Step 2.
AC004311BH
CONNECTOR: D-09
JUNCTION
BLOCK (REAR)
D-09
AC004958AG
CONNECTOR: E-07
E-07
AC004958AH
CONNECTOR: E-07
E-07
COMPONENT SIDE
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст