Mitsubishi Montero Sport (2004+). Manual — part 533
COMBINATION METER ASSEMBLY AND VEHICLE SPEED SENSOR
TSB Revision
CHASSIS ELECTRICAL
54-119
COMBINATION METER ASSEMBLY
REMOVAL AND INSTALLATION
M1543021300039
INSPECTION
M1543019501556
FUEL GAUGE RESISTANCE CHECK
CAUTION
When inserting the test probe into the power supply termi-
nal, be careful not to touch the printer board.
1. Remove the power supply tightening screw.
2. Use an ohmmeter to measure the resistance between the
terminals.
Standard value:
Power supply
− Ground: 192 Ω
Power supply
− Fuel gauge: 107 Ω
Fuel gauge
− Ground: 85 Ω
3. If within the standard value, the fuel gauge is OK.
If not within the standard value, replace the fuel gauge.
AC002767AB
1
2
: Metal clip position
NOTE
COMBINATION METER REMOVAL
STEPS
1. METER BEZEL
2. COMBINATION METER
AC002768AB
FUEL
GAUGE
POWER
SUPPLY
GROUND
COMBINATION METER ASSEMBLY AND VEHICLE SPEED SENSOR
TSB Revision
CHASSIS ELECTRICAL
54-120
ENGINE COOLANT TEMPERATURE GAUGE
RESISTANCE CHECK
CAUTION
When inserting the test probe into the power supply termi-
nal, be careful not to touch the printer board.
1. Remove the power supply tightening screw.
2. Use an ohmmeter to measure the resistance between the
terminals.
Standard value:
Power supply
− Ground: 191 Ω
Power supply
− Engine coolant temperature gauge:
103
Ω
Engine coolant temperature gauge
− Ground: 88 Ω
3. If within the standard value, the engine coolant temperature
gauge is OK.
If not within the standard value, replace the engine coolant
temperature gauge.
VEHICLE SPEED SENSOR CHECK
1. Remove the vehicle speed sensor and connect a 3
− 10
ohms resistor as shown in the illustration.
2. Turn the shaft of the vehicle speed sensor and check that
there is voltage between terminals 2
− 3. (1 turn = 4 pulses)
3. If within the standard value, the vehicle speed sensor is OK.
If not within the standard value, replace the vehicle speed
sensor.
AC002769 AB
ENGINE
COOLANT
TEMPERATURE
GAUGE
GROUND
POWER
SUPPLY
AC102349AB
TURN
SHAFT
RESISTOR
3 - 10
COMBINATION METER ASSEMBLY AND VEHICLE SPEED SENSOR
TSB Revision
CHASSIS ELECTRICAL
54-121
DISASSEMBLY AND ASSEMBLY
M1543003100233
AC002770 AB
1
2
3
4
5
6
7
8
9
DISASSEMBLY STEPS
1. BULB
2. METER GLASS
3. WINDOW PLATE
4. ENGINE COOLANT TEMPERATURE
GAUGE
5. TACHOMETER
6. SPEEDOMETER
7. FUEL GAUGE
8. PRINTED CIRCUIT BOARD
9. METER CASE
DISASSEMBLY STEPS (Continued)
AMBIENT TEMPERATURE SENSOR
TSB Revision
CHASSIS ELECTRICAL
54-122
AMBIENT TEMPERATURE SENSOR
REMOVAL AND INSTALLATION
M1543009500046
AC002771
1
2
AB
REMOVAL STEPS
• INTERCOOLER GRILL (REFER TO
1. BRACKET
2. AMBIENT TEMPERATURE SENSOR
REMOVAL STEPS (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст