Mitsubishi Montero Sport (2004+). Manual — part 709
AUTOMATIC TRANSMISSION DIAGNOSIS
TSB Revision
AUTOMATIC TRANSMISSION
23A-401
STEP 3. Measure the switch output voltage at transfer low
detection switch connector B-17.
(1) Disconnect connector B-17 and measure at the harness
side.
(2) Turn the ignition switch to the "ON" position.
(3) Measure the voltage between terminal 1 and ground.
• The voltage should measure battery positive voltage.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the measured voltage battery positive voltage?
YES : Go to Step 10.
NO : Go to Step 4.
AC103769
CONNECTOR: B-17
AC
B-17
1
AC002217
AE
B-17 HARNESS CONNECTOR:
COMPONENT SIDE
AUTOMATIC TRANSMISSION DIAGNOSIS
TSB Revision
AUTOMATIC TRANSMISSION
23A-402
STEP 4. Measure the switch output voltage at PCM
connector C-92 by backprobing.
(1) Do not disconnect connector C-92.
(2) Turn the ignition switch to the "ON" position.
(3) Measure the voltage between terminal 112 and ground by
backprobing.
• The voltage should measure battery positive voltage.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the measured voltage battery positive voltage?
YES : Go to Step 5.
NO : Go to Step 7.
AC202317
PCM
120
107
119
106
129 130
118
105
117
114115116
126127128
104
111
103
112
108
101102
109110
121122123
124
113
125
CONNECTOR: C-92
C-92 (GR)
AB
AC002218AD
C-92 HARNESS CONNECTOR:
HARNESS SIDE
AUTOMATIC TRANSMISSION DIAGNOSIS
TSB Revision
AUTOMATIC TRANSMISSION
23A-403
STEP 5. Check PCM connector C-92 and intermediate
connector C-96 for loose, corroded or damaged terminals,
or terminals pushed back in the connector.
Q: Are the connectors and terminals in good condition?
YES : Go to Step 6.
NO : Repair or replace the damaged components. Refer to
GROUP 00E, Harness Connector Inspection
AC202317
PCM
120
107
119
106
129 130
118
105
117
114115116
126127128
104
111
103
112
108
101102
109110
121122123
124
113
125
CONNECTOR: C-92
C-92 (GR)
AB
AC202318
22
9 10
20
19
6 7 8
21
17
1516
5
14
1213
3
2
4
18
11
1
AB
CONNECTOR: C-96
C-96
AUTOMATIC TRANSMISSION DIAGNOSIS
TSB Revision
AUTOMATIC TRANSMISSION
23A-404
STEP 6. Check harness for open circuit between transfer
low detection switch connector B-17 terminal 1 and PCM
connector C-92 terminal 112.
Q: Is the harness wire in good condition?
YES : Go to Step 9.
NO : Repair or replace the harness wire.
AC103769
CONNECTOR: B-17
AC
B-17
1
AC202317
PCM
120
107
119
106
129 130
118
105
117
114115116
126127128
104
111
103
112
108
101102
109110
121122123
124
113
125
CONNECTOR: C-92
C-92 (GR)
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст