Mitsubishi Montero (2002-2004). Manual — part 300
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-247
STEP 4. Check the wiring harness between windshield
wiper motor connector B-12 (terminal 1) and front-ECU
connector A-08X (terminal 28 ).
NOTE: Also check intermediate connector A-05 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector A-05 is damaged, repair or
replace the damaged component(s) as described in GROUP
00E, Harness Connector Inspection
Q: Is the wiring harness between windshield wiper motor
connector B-12 (terminal 1) and front-ECU connector A-
08X (terminal 28) in good condition?
YES : Go to Step 5.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the windshield wiper operates normally when the
windshield wiper switch is moved to each position.
AC205138
CONNECTOR: A-08X
AC
BATTERY
FRONT-ECU
A-08X
A-08X
AC205116 AC
CONNECTOR: B-12
B-12 (B)
B-12 (B)
AC205142AC
CONNECTOR: A-05
A-05(B)
A-05(B)
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-248
STEP 5. Check the wiring harness between windshield
wiper motor connector B-12 (terminal 4) and front-ECU
connector A-08X (terminal 27).
Q: Is the wiring harness between windshield wiper motor
connector B-12 (terminal 4) and front-ECU connector A-
08X (terminal 27) in good condition?
YES : No action is necessary and testing is complete.
NO : The wiring harness may be damaged or the
connector(s) may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the wiring harness as necessary. Verify that
the windshield wiper operates normally when the
windshield wiper switch is moved to each position.
AC205138
CONNECTOR: A-08X
AC
BATTERY
FRONT-ECU
A-08X
A-08X
AC205116 AC
CONNECTOR: B-12
B-12 (B)
B-12 (B)
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-249
INSPECTION PROCEDURE G-4: Windshield Wiper and Washer: The windshield wiper does not stop at
the predetermined park position.
Windshield Wiper Automatic Stop Relay Circuit
AC205142AB
CONNECTOR: A-05
A-05(B)
AC205138
CONNECTOR: A-08X
AB
BATTERY
FRONT-ECU
A-08X
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-250
.
TECHNICAL DESCRIPTION (COMMENT)
If the windshield wiper does not stop at predeter-
mined park position, the windshield wiper motor or
the front-ECU may be defective.
.
TROUBLESHOOTING HINTS
• The windshield wiper motor may be defective
• The front-ECU may be defective
• The wiring harness or connectors may have
loose, corroded, or damaged terminals, or termi-
nals pushed back in the connector
AC205116 AB
CONNECTOR: B-12
B-12 (B)
AC204170
CONNECTOR : D-28
BB
ACX02285
CONNECTORS: D-208, D-221
AI
D-208
JUNCTION BLOCK (FRONT VIEW)
D-221
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст