Mitsubishi Montero (2002-2004). Manual — part 264
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-103
STEP 9. Check the harness wiring from ETACS-ECU
connector D-222 (terminal 17) to front passenger's door
lock actuator connector H-24 (terminal 6).
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
AC000238 AL
CONNECTOR: H-24
FRONT DOOR <RH>
1
2
3
4
5
6
H-24 (B)
H-24 (B)
(HARNESS SIDE)
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-104
NOTE: Also check junction block connector D-217 and inter-
mediate connector D-15 for loose, corroded, or damaged termi-
nals, or terminals pushed back in the connector. If junction
block connector D-217 or intermediate connector D-15 is dam-
aged, repair or replace the damaged component(s) as
described in GROUP 00E, Harness Connector Inspec-
tion
Q: Is the harness wiring from ETACS-ECU connector D-222
(terminal 17) to front passenger's door lock actuator
connector H-24 (terminal 6) in good condition?
YES : Replace the ETACS-ECU. Verify that all the doors
can be locked and unlocked normally.
NO : The harness wiring may be damaged or the
connectors may have loose, corroded or damaged
terminals, or terminals pushed back in the connector.
Repair the harness wiring as necessary. After repairs
have been made, verify that all the doors can now be
locked and unlocked normally.
AC203850
CONNECTOR: D-217
AH
D-217
JUNCTION BLOCK
(FRONT VIEW)
D-217
1
8 9 10 11
13 14 15
12
2 3 4
5 6 7
AC203860 AB
D-15
D-15
CONNECTOR: D-15
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-105
STEP 10. Check the rear passenger's door lock actuator
(LH).
1. Remove the rear passenger's door lock actuator (LH), and
check it. Refer to GROUP 42
− Door Handle and Latch
2. Follow the table below to check the rear passenger's door
lock actuator (LH) for correct operation.
Q: Does the rear passenger's door lock actuator (LH) work
normally?
YES : Go to Step 11.
NO : Replace the rear passenger's door lock actuator (LH).
Verify that all the doors can be locked and unlocked
normally.
LEVER
POSITION
BATTERY
CONNECTION
LEVER
OPERATION
At the
"LOCK"
position
• Connect terminal 2 to
the positive battery
terminal
• Connect terminal 3 to
the negative battery
terminal
The lever moves
from the "LOCK"
position to the
"UNLOCK" position.
At the
"UNLOCK"
position
• Connect terminal 3 to
the positive battery
terminal
• Connect terminal 2 to
the negative battery
terminal
The lever moves
from the "UNLOCK"
position to the
"LOCK" position.
ACX00543
LOCK
UNLOCK
VIEW A
A
AE
LEVER
SYMPTOM PROCEDURES
TSB Revision
SWS SYMPTOM PROCEDURES
54Bb-106
STEP 11. Check ETACS-ECU connector D-222 and rear
passenger's door lock actuator (LH) connector H-13 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Are ETACS-ECU connector D-222 and rear passnger's
door lock actuator (LH) connector H-13 in good
condition?
YES : Go to Step 12.
NO : Repair or check the connector. Refer to GROUP 00E,
Harness Connector Inspection
. After repairs
have been made, verify that all the doors can now be
locked and unlocked normally.
AC204174
CONNECTOR : D-222
AB
1
2
3
5
6
4
9 8
121110
13
15 14
16
17
7
19
20
18
JUNCTION BLOCK SIDE
D-222
AC000237 AJ
CONNECTOR: H-13
REAR DOOR <LH>
1 2 3
4 5 6
H-13 (B)
H-13 (B)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст