Mitsubishi Pajero Pinin. Manual — part 194
PROPELLER SHAFT – Propeller Shaft
25-7
3.
Install the snap ring on the opposite side and measure the
clearance of the snap ring groove with a thickness gauge.
Standard value:
Front propeller shaft (A) 0 – 0.06 mm
Rear propeller shaft (A) 0.02 – 0.06 mm
Caution
Always use snap rings of the same thickness on both
sides.
4.
If the standard value(s) are not met, use other snap rings
to adjust the clearance.
Items
Thickness mm
Identification
colour
Front propeller shaft,
R
ll
h ft
1.28
–
Rear propeller shaft
1.31
Yellow
1.34
Blue
1.37
Purple
Rear propeller shaft
1.40
Brown
Snap ring
A
NOTES
PROPELLER SHAFT –
General/Service Specifications
25-1
GROUP 25
PROPELLER SHAFT
GENERAL
OUTLINE OF CHANGE
Specifications for 5 door models have been added.
SERVICE SPECIFICATIONS
Items
Standard value
Limit
Propeller shaft runout mm
Front
–
0.5
Rear
–
0.4
Length of rear propeller shaft mm
790
±
1.5
–
Clearance of snap ring
groove mm
Front
0 – 0.06
–
groove mm
Rear
0.02 – 0.06
–
PROPELLER SHAFT – General/Service Specifications
25-1
GROUP 25
PROPELLER SHAFT
GENERAL
OUTLINE OF CHANGE
Specifications for 1800-MPI models have been added.
SERVICE SPECIFICATIONS
Items
Standard value
Limit
Propeller shaft runout mm
Front
–
0.5
Rear
–
0.4
Length of rear propeller shaft mm
642.5
±
1.5 <3 door models>
814.5
±
1.5 <5 door models>
–
Clearance of snap ring
groove mm
Front
0 – 0.06
–
groove mm
Rear
0.02 – 0.06
–
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст