Mitsubishi Pajero Pinin. Manual — part 99
22
PROCEDURE 2
OXYGEN SENSOR <FRONT> MONITOR (P0130)
One trip monitor [from start to ignition switch to “LOCK” (OFF) position] will be completed while
traveling with the following drive cycle pattern. It will take 5 minutes or more.
Drive cycle
pattern
Inspection
conditions
•
Engine coolant temperature : 85
°C or more
•
Atmospheric temperature : -10
°C or more
•
Condition of A/T :Selector lever D range, overdrive switch “ON” position
Test
procedure
1. Engine
:
start
2. Accelerate until the vehicle speed is 80 – 100 km/h.
3. While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 80 –
100 km/h and travel for 5 minutes or more.
•
Stopping and braking during this operation are permitted. Keep the accelerator pedal
opening degree constant for 1 minute or more after each acceleration.
4. Return the vehicle to the shop, then turn the ignition switch “LOCK” (OFF) position.
2000 PAJERO/PININ Workshop Manual Supplement 4G93
GDI - Troubleshooting
Y6002BY
Vehicle
speed
5 minutes or more
80 – 100 km/h
Engine start
Stopping and
braking permitted
Ignition switch ”LOCK”
(OFF) position
Time
23
PROCEDURE 3
Monitor item
FUEL TRIM MONITOR (P0170)
One trip monitor [from start to ignition switch to “LOCK” (OFF) position] will be completed while
traveling with the following drive cycle pattern. It will take 15 minutes or more.
Drive cycle
pattern
Inspection
conditions
•
Engine coolant temperature : 85
°C or more
•
Atmospheric temperature : -10
°C or more
•
Condition of A/T :Selector lever D range, overdrive switch “ON” position
Test
procedure
1. Engine
:
start
2. Accelerate until the vehicle speed is 80 – 100 km/h.
3. While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 80 –
110 km/h and travel for 15 minutes or more.
4. Return the vehicle to the shop, then turn the ignition switch “LOCK” (OFF) position.
2000 PAJERO/PININ Workshop Manual Supplement 4G93
GDI - Troubleshooting
Y6002BY
Vehicle
speed
15 minutes or more
80 – 110 km/h
Engine start
Stopping and
braking permitted
Ignition switch ”LOCK”
(OFF) position
Time
24
PROCEDURE 4
Monitor item
FEED BACK MONITOR (P0125)
One trip monitor [from start to ignition switch to “LOCK” (OFF) position] will be completed while
traveling with the following drive cycle pattern. It will take 5 minutes or more.
Drive cycle
pattern
Inspection
conditions
•
Engine coolant temperature : 85
°C or more
•
Atmospheric temperature : -10
°C or more
•
Condition of A/T :Selector lever D range, overdrive switch “ON” position
Test
procedure
1. Engine
:
start
2. Accelerate until the vehicle speed is 100 – 120 km/h.
3. While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 100 –
120 km/h and travel for 15 minutes or more.
4. Return the vehicle to the shop, then turn the ignition switch “LOCK” (OFF) position.
2000 PAJERO/PININ Workshop Manual Supplement 4G93
GDI - Troubleshooting
Y6002BY
Vehicle
speed
5 minutes or more
100 – 120 km/h
Engine start
Stopping and
braking permitted
Ignition switch ”LOCK”
(OFF) position
Time
25
PROCEDURE 5
monitor item
OTHER MONITOR
Diagnosis
code No.
P0136, P0201, P0202, P0203, P0204, P0300, P0301, P0302, P0303, P0304, P0325
One trip monitor [from start to ignition switch to “LOCK” (OFF) position] will be completed while
traveling with the following drive cycle pattern. It will take 6 minutes or more.
Drive cycle
pattern
Inspection
conditions
•
Engine coolant temperature : 85
°C or more
•
Atmospheric temperature : -10
°C or more
•
Condition of A/T :Selector lever D range, overdrive switch “ON” position
Test
procedure
1. Engine
:
start
2. Accelerate until the vehicle speed is 60 km/h.
3. While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 60
km/h or more and travel for 5 minutes or more.
4. Return the vehicle to the shop
5. After stopping the vehicle, continue idling for 30 seconds, and then turn the ignition switch to
”LOCK” (OFF) position.
•
A/C switch : OFF
•
Light and all accessories: OFF
•
Transmission : Neutral
2000 PAJERO/PININ Workshop Manual Supplement 4G93
GDI - Troubleshooting
Y6009BY
Vehicle
speed
5 minutes or more
60 km/h or more
Engine start
30 seconds or more
Engine: Idling
Transmission: Neutral
Ignition switch ”LOCK”
(OFF) position
Time
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст