Mitsubishi Pajero Pinin. Manual — part 94
2
2. Applicable Manuals:
Manual
Pub. No.
Language
Page(s)
2001 GALANT
PWDE9611-B
(English) 4G64-GDI:13I-8
Workshop Manual Supplement
PWDS9612-B
(Spanish) 4G63-MPI:13A-7
PWDF9613-B
(French) 6A13-MPI:13A-97
PWDG9614-B
(German)
PWDD9615-B
(Dutch)
PWDW9616-B
(Swedish)
2001 SPACE RUNNER/ SPACE WAGON PWDE9803-C
(English) 4G64-GDI:13A-9
Workshop Manual Supplement
PWDS9804-C
(Spanish) 4G63-MPI:13D-12
PWDF9805-C
(French)
PWDG9806-C
(German)
PWDD9807-C
(Dutch)
PWDW9808-C
(Swedish)
2001 CARISMA
PWDE9502-E
(English) 4G93-GDI:13J-8
Workshop Manual Supplement
PWDS9503-E
(Spanish) 4G92-MPI:13A-7
PWDF9504-E
(French)
PWDG9505-E
(German)
PWDD9506-E
(Dutch)
PWDW9507-E
(Swedish)
2001 SPACE STAR
Workshop Manual Supplement
CMXE99E1-A
(English) 4G93-GDI:13A-9
4G13-MPI:13B-7
2001 COLT
PWME9511-C
(English) 4G13-MPI:13A-7
Workshop Manual Supplement
PWMS9512-C
(Spanish) 4G93-MPI:13A-88
PWMF9513-C
(French)
PWMG9514-C
(German)
PWMD9515-C
(Dutch)
PWMW9516-C
(Swedish)
2001 PAJERO
Workshop Manual VOL1
PWJE0001(1/2)
(English)
2001 MONTERO
Workshop Manual VOL1
PWJS0002(1/2)
(Spanish)
2001 PAJERO/MONTERO
(English)
Workshop Manual CD-ROM
(Spanish)
(French)
PWJT0008R
(German)
6G74-GDI:13A-12
2001 PAJERO SPORT
PWJE9812-B
(English) 6G72-MPI:13A-8
Workshop Manual Supplement
PWJS9813-B
(Spanish)
PWJF9814-B
(French)
PWJG9815-B
(German)
2001 PAJERO PININ
Workshop Manual Supplement
CKRE99E1-A
(English) 4G93-GDI: 13A-9
3
DRIVE CYCLE
Performing the running test of the car using the following five drive cycle patterns makes it possible to
monitor all the diagnosis codes that are required for operation of the car in order to determine if the
applicable system is operating properly or not.
In other words, doing such a drive allows to regenerate any kind of trouble which involves illuminating the
Engine Warning Lamp (Check Engine Lamp) and to verify the repair procedure has eliminated the trouble
[the Engine Warning Lamp (Check Engine Lamp) is no longer illuminated].
Caution
Two technicians should always be in the vehicle when carrying out a test drive.
NOTE
Check that the diagnosis code is not output before traveling in the Drive cycle pattern. Erase the diagnosis
code if it has been output.
DRIVE CYCLE PATTERN LIST
PROCEDURE
MONITOR ITEM
DIAGNOSIS CODE
1
Catalytic converter monitor
P0420
2
Heated oxygen sensor <front> monitor
P0130
3
Fuel trim monitor
P0170
4
Feed back monitor
P0125
5
Other monitor
P0136, P0201, P0202, P0203, P0204, P0300,
P0301, P0302, P0303, P0304, P0325
NOTE
The vehicle speed sensor (P0500) and the power steering fluid pressure switch (P0551) are used to
determine if the system is operating properly or not through use of the Data List function of the MUT-II.
3. Details:2001 GALANT Workshop Manual Supplement 4G64
2001 SPACE RUNNER/SPACE WAGON Workshop Manual Supplement 4G64
GDI - Troubleshooting
4
PROCEDURE 1
Monitor item
CATALYTIC CONVERTER MONITOR (P0420)
One trip monitor [from start to ignition switch to “LOCK” (OFF) position] will be completed while
traveling with the following drive cycle pattern. It will take 10 minutes or more.
Drive cycle
pattern
Inspection
conditions
•
Atmospheric temperature :-10
°C or more
•
Condition of A/T :Selector lever D range, overdrive switch “ON” position
Test
procedure
1. Engine
:
start
2. Accelerate until the vehicle speed is 100 km/h or more.
3. Travel for 5 minutes or more while keeping the vehicle speed is 100 km/h or more.
4. Decelerate until the vehicle speed is 100 – 120 km/h or less.
5. While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 100 –
120 km/h and travel for 5 minutes or more.
•
Stopping and braking during this operation are permitted.
6. Return the vehicle to the shop, then turn the ignition switch “LOCK” (OFF) position.
2001 GALANT Workshop Manual Supplement 4G64
2001 SPACE RUNNER/SPACE WAGON Workshop Manual Supplement 4G64
GDI - Troubleshooting
Y6005BY
100 – 120 km/h
Vehicle
speed
5 minutes or more
100 km/h or more
Engine start
Stopping and
braking permitted
Ignition switch ”LOCK”
(OFF) position
Time
5 minutes or more
5
PROCEDURE 2
OXYGEN SENSOR <FRONT> MONITOR (P0130)
One trip monitor [from start to ignition switch to “LOCK” (OFF) position] will be completed while
traveling with the following drive cycle pattern. It will take 5 minutes or more.
Drive cycle
pattern
Inspection
conditions
•
Engine coolant temperature : 85
°C or more
•
Atmospheric temperature : -10
°C or more
•
Condition of A/T :Selector lever D range, overdrive switch “ON” position
Test
procedure
1. Engine
:
start
2. Accelerate until the vehicle speed is 80 – 100 km/h.
3. While keeping the accelerator pedal opening degree constant, keep the vehicle speed at 80 –
100 km/h and travel for 5 minutes or more.
•
Stopping and braking during this operation are permitted. Keep the accelerator pedal
opening degree constant for 1 minute or more after each acceleration.
4. Return the vehicle to the shop, then turn the ignition switch “LOCK” (OFF) position.
2001 GALANT Workshop Manual Supplement 4G64
2001 SPACE RUNNER/SPACE WAGON Workshop Manual Supplement 4G64
GDI - Troubleshooting
Y6002BY
Vehicle
speed
5 minutes or more
80 – 100 km/h
Engine start
Stopping and
braking permitted
Ignition switch ”LOCK”
(OFF) position
Time
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст