Mitsubishi Eclipse. Manual — part 776
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-113
STEP 21. Check PCM connectors C-50 <2.4L Engine> or
C-52 <3.0L Engine> and C-54 <2.4L Engine> or C-55 <3.0L
Engine>, and MFI relay connector A-18X for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Are the connectors and terminals in good condition?
YES : Go to Step 22.
NO : Repair or replace the damaged components. Refer to
GROUP 00E, Harness Connector Inspection
AC001657
CONNECTORS: C-50 <2.4L ENGINE> OR
C-52 <3.0L ENGINE>, C-54 <2.4L ENGINE>
OR C-55 <3.0L ENGINE>
PCM
BF
C-50 <2.4L ENGINE> OR
C-52 <3.0L ENGINE>
C-54 <2.4L ENGINE> OR
C-55 <3.0L ENGINE>
AC102447AE
BATTERY
CONNECTOR: A-18X
A-18X
FRONT OF VEHICLE
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-114
STEP 22. Check the harness for damage between
crankshaft position sensor connector B-20 terminal 1 and
PCM connector C-50 <2.4L Engine> or C-52 <3.0L Engine>
terminal 16.
Q: Is the harness wire in good condition?
YES : Go to Step 23.
NO : Repair or replace the harness wire.
AC004926AC
CONNECTOR: B-20
<2.4L ENGINE>
B-20
AC004927AC
CONNECTOR: B-20
<3.0L ENGINE>
B-20
AC001657
CONNECTOR: C-50 <2.4L ENGINE> OR
C-52 <3.0L ENGINE>
PCM
BE
C-50 <2.4L ENGINE> OR
C-52 <3.0L ENGINE>
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-115
STEP 23. Check the harness for damage between
crankshaft position sensor connector B-20 terminal 2 and
PCM connector C-54 <2.4L Engine> or C-55 <3.0L Engine>
terminal 45.
Q: Is the harness wire in good condition?
YES : Go to Step 24.
NO : Repair or replace the harness wire.
AC004926AC
CONNECTOR: B-20
<2.4L ENGINE>
B-20
AC004927AC
CONNECTOR: B-20
<3.0L ENGINE>
B-20
AC001657
CONNECTOR: C-54 <2.4L ENGINE> OR
C-55 <3.0L ENGINE>
PCM
BA
C-54 <2.4L ENGINE> OR C-55 <3.0L ENGINE>
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-116
STEP 24. Check the harness for damage between MFI relay
connector A-18X terminal 4 in the engine component relay
box and crankshaft position sensor connector B-20
terminal 3.
Q: Is the harness wire in good condition?
YES : Go to Step 25.
NO : Repair or replace the harness wire.
STEP 25. Check the crankshaft angle sensing blade.
Q: Is the crankshaft angle sensing blade in good
condition?
YES : Replace the crankshaft position sensor. Refer to
GROUP 16, Ignition System
− Crankshaft Position
Sensor Removal and Installation <2.4L
Engine>
or <3.0L Engine>
NO : Replace the crankshaft angle sensing blade.
AC102447AE
BATTERY
CONNECTOR: A-18X
A-18X
FRONT OF VEHICLE
AC004926AC
CONNECTOR: B-20
<2.4L ENGINE>
B-20
AC004927AC
CONNECTOR: B-20
<3.0L ENGINE>
B-20
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст