Mitsubishi Eclipse. Manual — part 788
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-161
STEP 2. Check the transmission range switch.
Measure the resistance between the terminals for each selec-
tor position as indicated in the table below.
NOTE: For vehicles with sport mode, four positions (P, R, N, D)
are used.
Q: Does the resistance measure less than 2 ohms for each
selector position?
YES : Go to Step 3.
NO : Replace the transmission range switch. Refer to
GROUP 23B, Transaxle
SELECTOR
POSITION
TERMINAL CONNECTION
OF TESTER
SPECIFIED
CONDITION
P
3
− 8, 9 − 10
Less than 2 ohms.
R
7
− 8
N
4
− 8, 9 − 10
D
1
− 8
3
5
− 8
2
2
− 8
L
6
− 8
AC004672
DIPSTICK
TRANSMISSION
RANGE SWITCH
AK
AC005865
P
R
N
D
3
2
L
AB
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-162
STEP 3. Check transmission range switch connector B-41,
intermediate connector C-28 and junction block connector
C-112 for loose, corroded or damaged terminals, or
terminals pushed back in the connector.
Q: Are the connectors and terminals in good condition?
YES : Go to Step 4.
NO : Repair or replace the damaged components. Refer to
GROUP 00E, Harness Connector Inspection
AC001844
CONNECTOR: B-41
DIPSTICK
AK
B-41
AC106611AB
CONNECTOR: C-28
C-28
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-163
AC106612AB
CONNECTOR: C-112
JUNCTION BLOCK
(FRONT VIEW)
C-112
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-164
STEP 4. Check harness for open or short circuit to ground
between transmission range switch connector B-41
terminal 8 and junction block connector C-112 terminal 12.
Q: Is the harness wire in good condition?
YES : Go to Step 5.
NO : Repair or replace the harness wire.
AC001844
CONNECTOR: B-41
DIPSTICK
AK
B-41
AC106612AB
CONNECTOR: C-112
JUNCTION BLOCK
(FRONT VIEW)
C-112
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст