Mitsubishi Eclipse. Manual — part 678
IGNITION SYSTEM
TSB Revision
ENGINE ELECTRICAL
16-55
REMOVAL AND INSTALLATION <3.0L ENGINE>
M1163003500428
Pre-removal and Post-installation Operation
• Timing Belt Removal and Installation (Refer to
GROUP11C, Timing Belt
AC000293
1
2
8.8 ± 1.0 N·m
78 ± 9 in-lb
AB
REMOVAL STEPS
1.
CLIP
2.
CRANKSHAFT POSITION
SENSOR
IGNITION SYSTEM
TSB Revision
ENGINE ELECTRICAL
16-56
KNOCK SENSOR
REMOVAL AND INSTALLATION <2.4L ENGINE>
M1163002800523
CAUTION
Do not drop or hit the knock sensor against other components. Internal damage may result, and the
knock sensor will need to be replaced.
Required Special Tool:
MD998773: Knock Sensor Wrench
REMOVAL SERVICE POINT
.
<<A>> KNOCK SENSOR REMOVAL
Use special tool MD998773 to removal the knock sensor.
INSTALLATION SERVICE POINT
.
>>A<< KNOCK SENSOR INSTALLATION
Use special tool MD998773 to install the knock sensor.
Pre-removal and Post-installation Operation
• Air Cleaner Removal and Installation (Refer to GROUP
15, Air Cleaner
.)
• Intake Manifold Stay Removal and Installation (Refer to
GROUP 15, Intake Manifold
.)
AC000294 AB
1
23 ± 2 N·m
16 ± 2 ft-lb
REMOVAL
<<A>>
>>A<<
1.
KNOCK SENSOR
AC000295
MD998773
AB
IGNITION SYSTEM
TSB Revision
ENGINE ELECTRICAL
16-57
REMOVAL AND INSTALLATION <3.0L ENGINE>
M1163002800534
CAUTION
Do not drop or hit the knock sensor against other components. Internal damage may result, and the
knock sensor will need to be replaced.
Required Special Tool:
MD998773: Knock Sensor Wrench
REMOVAL SERVICE POINT
.
<<A>> KNOCK SENSOR REMOVAL
Use special tool MD998773 to removal the knock sensor.
INSTALLATION SERVICE POINT
.
>>A<< KNOCK SENSOR INSTALLATION
Use special tool MD998773 to install the knock sensor.
Pre-removal and Post-installation Operation
• Intake Manifold Removal and Installation (Refer to
GROUP 15, Intake Manifold
.)
AC000296 AB
1
23 ± 2 N·m
16 ± 2 ft-lb
REMOVAL
<<A>>
>>A<<
1.
KNOCK SENSOR
AC000297 AB
MD998773
SPECIFICATIONS
TSB Revision
ENGINE ELECTRICAL
16-58
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
M1161002100498
ITEMS
SPECIFICATIONS
Charging system
Bearing retainer
3.7
± 0.7 N⋅m (33 ± 6 in-lb)
Front bracket assembly bolt
4.4
± 1.0 N⋅m (39 ± 9 in-lb)
Generator bolt <2.4L ENGINE>
23
± 2 N⋅m (16 ± 2 ft-lb)
Generator bolt <3.0L ENGINE>
21
± 4 N⋅m (16 ± 3 ft-lb)
Generator brace bolt <2.4L ENGINE>
23
± 2 N⋅m (16 ± 2 ft-lb)
Generator brace bolt <2.4L ENGINE>
4.9
± 1.0 N⋅m (44 ± 8 in-lb)
Generator brace bolt <3.0L ENGINE>
49
± 10 N⋅m (36 ± 7 ft-lb)
Generator nut
44
± 10 N⋅m (33 ± 7 ft-lb)
Oil level gauge unit bolt <3.0L ENGINE>
14
± 1 N⋅m (117 ± 13 in-lb)
Engine oil pressure hose and tube clamp bolt <2.4L ENGINE>
12
± 2 N⋅m (100 ± 22 in-lb)
Oil return tube clamp bolt <2.4L ENGINE>
12
± 2 N⋅m (100 ± 22 in-lb)
Regulator assembly
3.7
± 0.7 N⋅m (33 ± 6 in-lb)
Starting system
Cover bolt
5.8
± 1.6 N⋅m (52 ± 14 in-lb)
Magnetic switch bolt
5.8
± 1.6 N⋅m (52 ± 14 in-lb)
Rear bracket bolt
3.4
± 1.0 N⋅m (30 ± 9 in-lb)
Starter bolt
30
± 3 N⋅m (23 ± 2 ft-lb)
Starter cover bolt <2.4L ENGINE>
4.9
± 1.0 N⋅m (44 ± 8 in-lb)
Starter screw
5.7
± 1.5 N⋅m (51 ± 13 in-lb)
Ignition system
Camshaft position sensor bolt <2.4L ENGINE>
8.8
± 1.0 N⋅m (78 ± 9 in-lb)
Crankshaft position sensor bolt <2.4L ENGINE>
8.8
± 1.0 N⋅m (78 ± 9 in-lb)
Crankshaft position sensor bolt <3.0L ENGINE>
8.8
± 1.0 N⋅m (78 ± 9 in-lb)
Distributor cap <3.0L ENGINE>
2.3
± 0.7 N⋅m (20 ± 6 in-lb)
Distributor nut <3.0L ENGINE>
13
± 2 N⋅m (109 ± 21 in-lb)
Ignition coil bolt <2.4L ENGINE>
9.8
± 2.0 N⋅m (87 ± 17 in-lb)
Ignition failure sensor bolt <2.4L ENGINE>
4.9
± 1.0 N⋅m (44 ± 8 in-lb)
Knock sensor
23
± 2 N⋅m (16 ± 2 ft-lb)
Power steering oil pump assembly bolt <2.4L ENGINE>
29
± 4 N⋅m (21 ± 4 ft-lb)
Power steering oil pump bracket bolt <2.4L ENGINE>
49
± 10 N⋅m (36 ± 7 ft-lb)
Pressure hose and tube connection bolt <2.4L ENGINE>
12
± 2 N⋅m (100 ± 22 in-lb)
Spark plug
25
± 4 N⋅m (18 ± 3 ft-lb)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст