Mitsubishi Galant. Manual — part 463
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-21
16.Remove each accumulator piston and spring.
17.Remove the manual control lever shaft roller.
18.Remove the manual control lever shaft and the parking pawl
rod.
19.Remove the torque converter housing mounting bolts (18
pieces), and then remove the torque converter housing.
20.Remove the differential bearing outer race and spacer from
the torque converter housing.
21.Remove the O-rings (two pieces).
22.Remove the differential.
23.Remove the differential bearing outer race from the
transaxle case.
NUMBER
NAME
1
For low-reverse brake
2
For underdrive clutch
3
For second brake
4
For overdrive clutch
AKX01008
4
3
2
AB
1
AKX00962AB
MANUAL
CONTROL LEVER
SHAFT ROLLER
PARKING
PAWL ROD
MANUAL CONTROL
LEVER SHAFT
AKX01104
AKX01024AB
O-RINGS
AKX01025
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-22
24.Remove the oil filter.
25.Remove the oil pump mounting bolts (six pieces).
26.Install special tool MD998333 in hole "A."
27.Turn special tools MD998333 to remove the oil pump.
28.Remove the oil pump gasket.
29.Remove thrust washer number 1.
30.Holding the input shaft, remove the underdrive clutch and
input shaft.
AKX01026
AKX01027
A
AB
A
AKX01028
MD998333
AB
AKX01029
THRUST WASHER
NUMBER 1
AB
AKX01030
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-23
31.Remove thrust bearing number 2.
32.Remove the underdrive clutch hub.
33.Remove the rear cover.
34.Remove thrust race number 8.
35.Remove the seal rings (four pieces).
36.Remove the O-rings (three pieces).
37.Remove the reverse and overdrive clutch and thrust bearing
number 7.
AKX01031
THRUST BEARING
NUMBER 2
AB
AKX01032
AKX01139
THRUST RACE
NUMBER 8
INPUT SHAFT
REAR BEARING
SEAL
RINGS
REAR COVER
AB
AKX01010AB
O-RINGS
AKX01011
THRUST BEARING
NUMBER 7
AB
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-24
38.Remove overdrive clutch hub and thrust bearing number 6.
39.Remove thrust bearing number 5.
40.Remove the planetary reverse sun gear.
41.Remove the snap ring.
42.Remove the second brake piston and the return spring.
AKX01012
THRUST BEARING
NUMBER 6
AB
AKX01013
THRUST BEARING
NUMBER 5
AB
AKX01014
AKX01015
AKX01016
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст