Mitsubishi Galant. Manual — part 658
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-27
STEP 1. Check the ETACS-ECU connector C-82, column
switch connector C-60 and front-ECU connector A-09X for
damage.
Q: Are ETACS-ECU connector C-82, column switch
connector C-60 and front-ECU connector A-09X in good
condition?
YES : Go to Step 2.
NO : Repair or replace them. Refer to GROUP 00E,
Harness Connector Inspection
. Confirm the
DTC 21 is not displayed.
ACX02500 AD
BATTERY
CONNECTOR: A-09X
AC003078 AB
CONNECTOR: C-60
COLUMN SWITCH
AC003082AC
JUNCTION BLOCK
(FRONT VIEW)
CONNECTOR: C-82
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-28
STEP 2. Check the harness wires from ETACS-ECU
connector C-82 to column switch connector C-60 and
front-ECU connector A-09X.
NOTE: After inspecting intermediate connectors C-66, check
the wires. If intermediate connectors C-66 is damaged, repair
or replace them. Refer to GROUP 00E, Harness Connector
Inspection
.
Q: Are the harness wires from ETACS-ECU connector C-82
to column switch connector C-60 and front-ECU
connector A-09X in good condition?
YES : Go to Step 3.
NO : Replace them. Confirm the DTC 21 is not displayed.
ACX02500 AD
BATTERY
CONNECTOR: A-09X
AC003078 AB
CONNECTOR: C-60
COLUMN SWITCH
AC003082AC
JUNCTION BLOCK
(FRONT VIEW)
CONNECTOR: C-82
AC003079 AB
CONNECTOR
BLOCK (LH)
CONNECTOR: C-66
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-29
STEP 3. Check the column switch.
Disconnect column switch connector C-60.
Q: Does DTC 21 set?
YES : Go to Step 4.
NO (DTC 12 sets) : Replace the column switch. Confirm the
DTCs 12 and 21 are not displayed.
STEP 4. Check the front-ECU.
Disconnect front-ECU connector A-09X.
Q: Does DTC 21 set?
YES : Replace the ETACS-ECU. Confirm the DTC 21 is not
displayed..
NO (DTC 13 sets) : Replace the front-ECU. Confirm the
DTCs 13 and 21 are not displayed.
AC003078 AB
CONNECTOR: C-60
COLUMN SWITCH
ACX02500 AD
BATTERY
CONNECTOR: A-09X
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-30
SYMPTOM PROCEDURES
Inspection Procedure A-1: Scan tool MB991502 communication is not possible.
AC004201
ETACS-ECU Power Supply and Scan Tool Communication Circuit
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст