Mitsubishi Galant. Manual — part 667
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-63
STEP 2. Check the power window relay power supply
circuit at the power window relay connector A-04X.
(1)Disconnect the power window relay connector A-04X and
measure at the relay box side.
(2)Measure the voltages between terminal 1, 5 and ground.
Q: Are the voltages approximately 12 volts (battery
positive voltage)?
YES : Go to Step 5.
NO : Go to Step 3.
STEP 3. Check the power window connector A-04X for
damage.
Q: Is power window connector A-04X in good condition?
YES : Go to Step 4.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
should work normally.
STEP 4. Check the harness wire between power window
relay connector A-04X and fusible link (3).
Q: Is the harness wire between power window relay
connector A-04X and fusible link (3) in good condition?
YES : There is no action to be taken.
NO : Repair it. The power windows should work normally.
1
2
3
4
5
AC002066
CONNECTOR A-04X
(RELAY BOX SIDE)
AB
AC003128 AC
CONNECTOR: A-04X
A-04X
POWER
WINDOW
RELAY
BATTERY
AC002299AD
FUSIBLE LINK (3)
AC003128 AC
CONNECTOR: A-04X
A-04X
POWER
WINDOW
RELAY
BATTERY
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-64
STEP 5. Check the power window main switch ground
circuit at the power window main switch connector E-16.
(1)Disconnect the power window main switch connector E-16
and measure at the harness side.
(2)Measure the resistance between terminal 12 and ground.
Q: Is the resistance less than 2 ohm?
YES : Go to Step 8.
NO : Go to Step 6.
STEP 6. Check power window main switch connector E-16
for damage.
Q: Is power window main switch connector E-16 in good
condition?
YES : Go to Step 7.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
should work normally.
STEP 7. Check the harness wires between power window
main switch connector E-16 and ground.
NOTE: After checking intermediate connector C-68, check the
wires. If intermediate connector C-68 is damaged, repair or
replace it. Refer to GROUP 00E, Harness Connector
Inspection
.
Q: Are the harness wires between power window main
switch connector E-16 and ground in good condition?
YES : There is no action to be taken.
NO : Repair them. The power windows should work
normally.
AC003398 AC
CONNECTOR E-16
(JUNCTION BLOCK SIDE)
AC003086AB
DOOR
CONNECTOR: E-16
AC003086AB
DOOR
CONNECTOR: E-16
AC003079AG
CONNECTOR
BLOCK (LH)
CONNECTOR: C-68
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-65
STEP 8. Check the power window relay connector A-04X
and front-ECU connector A-09X for damage.
Q: Are power window relay connector A-04X and front-ECU
connector A-09X in good condition?
YES : Go to Step 9.
NO : Repair or replace them. Refer to GROUP 00E,
Harness Connector Inspection
windows should work normally.
STEP 9. Check the harness wire between power window
relay connector A-04X and front-ECU connector A-09X.
Q: Is the harness wire between power window relay
connector A-04X and front-ECU connector A-09X in
good condition?
YES : Go to Step 10.
NO : Repair it. The power windows should work normally.
STEP 10. Check the power window relay connector A-04X
and power window main switch connector E-16 for
damage.
Q: Are power window relay connector A-04X and power
window main switch connector E-16 in good condition?
YES : Go to Step 11.
NO : Repair or replace them. Refer to GROUP 00E,
Harness Connector Inspection
windows should work normally.
AC003128 AB
A-09X
CONNECTORS: A-04X, A-09X
FRONT - ECU
A-04X
POWER
WINDOW
RELAY
BATTERY
AC003128 AB
A-09X
CONNECTORS: A-04X, A-09X
FRONT - ECU
A-04X
POWER
WINDOW
RELAY
BATTERY
AC003128 AC
CONNECTOR: A-04X
A-04X
POWER
WINDOW
RELAY
BATTERY
AC003086AB
DOOR
CONNECTOR: E-16
SWS DIAGNOSIS
TSB Revision
SIMPLIFIED WIRING SYSTEM (SWS)
54B-66
STEP 11. Check the harness wires between power window
relay connector A-04X and power window main switch
connector E-16.
NOTE: After checking intermediate connectors C-66 and C-68,
check the wires. If intermediate connectors C-66 and C-68 are
damaged, repair or replace them. Refer to GROUP 00E,
Harness Connector Inspection
Q: Are the harness wires between power window relay
connector A-04X and power window main switch
connector E-16 in good condition?
YES : Replace the ETACS-ECU. The power windows
should work normally.
NO : Repair them. The power windows should work
normally.
Inspection Procedure D-2: Power window relay: Power window timer function does not work
normally.
TECHNICAL DESCRIPTION (COMMENT)
The ETACS-ECU operates the power window timer
function, based on input signals from the following
switches:
•
Ignition switch (IG1)
•
Driver's or passenger's door switch
If the power window timer function do not work
normally, the input signal circuit, the ETACS-ECU or
front-ECU may be defective.
TROUBLESHOOTING HINTS
•
Malfunction of the driver's or front passenger's
door switch
•
Malfunction of the ETACS-ECU
•
Malfunction of the front-ECU
•
Damaged harness wires or connectors
AC003128 AC
CONNECTOR: A-04X
A-04X
POWER
WINDOW
RELAY
BATTERY
AC003086AB
DOOR
CONNECTOR: E-16
AC003079AI
CONNECTOR
BLOCK (LH)
CONNECTORS: C-66, C-68
C-66
C-68
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст