Mitsubishi Eclipse / Eclipse Spyder (2000-2002). Service and repair manual — part 384
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-55
STEP 2. Check the output circuit voltage at auto-cruise
control-ECU connector C-20 by backprobing.
(1) Do not disconnect auto-cruise control switch connector C-
20.
(2) Turn the ignition switch to "ON" position.
(3) Measure the voltage between terminal 13 and ground by
backprobing.
•
Voltage should be 0.5 volts or less.
(When clutch pedal is depressed.)
•
Voltage should be battery positive voltage.
(When clutch pedal is not depressed.)
Q: Is the voltage within specifications?
YES : Check that the malfunction is eliminated.
If the malfunction is eliminated, replace the auto-
cruise control-ECU. (Refer to
.)
Then check that the malfunction is eliminated.
NO : Go to Step 3.
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
ACX01906
C-20 CONNECTOR
HARNESS SIDE VIEW
AF
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-56
STEP 3. Check clutch pedal position switch connector C-
01 and auto-cruise control-ECU connector C-20 and
intermediate connector C-89.
Q: Is any connector damaged?
YES : Repair or replace connector.
Refer to GROUP 00E, Harness Connector Inspection
.
Then check that the malfunction is eliminated.
NO : Go to Step 4.
AC003553 AL
CONNECTOR: C-01
AC001451
CONNECTOR: C-20
AB
AC001991AM
CONNECTOR: C-89
CONNECTOR
BLOCK (LH)
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-57
STEP 4. Check the harness wire between clutch pedal
position switch connector C-01 and auto-cruise control-
ECU connector C-20.
Q: Is any harness wire between clutch pedal position
switch connector C-01 and auto-cruise control-ECU
connector C-20 damaged?
YES : Repair the harness wire and then check that the
malfunction is eliminated.
NO : Go to Step 5.
STEP 5. Check the harness wire between clutch pedal
position switch connector C-01 and ground wire.
Q: Is any harness wire between clutch pedal position
switch connector C-01 and ground wire damaged?
YES : Repair the harness wire and then check that the
malfunction is eliminated.
NO : Check that the malfunction is eliminated.
If the malfunction is eliminated, replace the auto-
cruise control-ECU. (Refer to
.)
Then check that the malfunction is eliminated.
AC003553 AL
CONNECTOR: C-01
AC001451
CONNECTOR: C-20
AB
AC003553 AL
CONNECTOR: C-01
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-58
INSPECTION PROCEDURE 4: When the Selector Lever is Moved to "N" Range, Auto-cruise Control is
not Cancelled.
AC005116AB
Park/neutral Position Switch Circuit
AC001482
CONNECTOR: B-41
DIPSTICK
AB
AC001451
CONNECTOR: C-20
AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст