Mitsubishi Eclipse / Eclipse Spyder (2000-2002). Service and repair manual — part 530
OIL PUMP
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-51
O IL PU M P
DISASSEMBLY AND ASSEMBLY
M1233001300024
Required Special Tool:
MD998334: Oil Seal Installer
ASSEMBLY SERVICE POINTS
>>A<< OIL SEAL INSTALLATION
1. Apply a small amount of ATF to the lip of oil seal.
2. Use special tool MD998334 to tap the oil seal in the oil pump
body.
>>B<< O-RING INSTALLATION
Install a new O-ring to the outer groove of the oil pump, and
apply ATF or petroleum jelly (Vaseline) to the O-ring.
AKX01125
AKX01125
APPLY AUTOMATIC
TRANSMISSION FLUID
TO ALL MOVING PARTS
BEFORE INSTALLATION.
3
4
2
1
AB
DISASSEMBLY STEPS
>>B<<
1.
O-RING
2.
SEAL RING
>>A<<
3.
OIL SEAL
4.
OIL PUMP ASSEMBLY
DISASSEMBLY STEPS (Continued)
AKX01041
MD998334
AB
UNDERDRIVE CLUTCH AND INPUT SHAFT
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-52
UN D ERD RIVE CLU TCH A N D IN PU T SHA FT
DISASSEMBLY AND ASSEMBLY
M1233024500029
Required Special Tools:
MB991628: Spring Compressor <F4A42>
MB991629: Spring Compressor <F4A51>
MD998907: Spring Compressor
MD998924: Spring Compressor Retainer
AKX01126
AKX01126
13
10
15
15
10
12
13
11
14
11
12
14
6
8
9
8
3
2
2
3
1
1
9
5
4
4
5
7
6
7
APPLY AUTOMATIC
TRANSMISSION FLUID
TO ALL MOVING PARTS
BEFORE INSTALLATION.
AB
DISASSEMBLY STEPS
1. SNAP RING
2. INPUT SHAFT
3. SEAL RING
>>D<<
4. SNAP RING
>>C<<
5. CLUTCH REACTION PLATE
>>C<<
6. CLUTCH DISC
<<A>> >>C<<
7. CLUTCH PLATE
>>B<<
8. SNAP RING
9. SPRING RETAINER
>>A<<
10. D-RING
11. RETURN SPRING
12. UNDERDRIVE CLUTCH PISTON
>>A<<
13. D-RING
>>A<<
14. D-RING
15. UNDERDRIVE CLUTCH RETAINER
DISASSEMBLY STEPS (Continued)
UNDERDRIVE CLUTCH AND INPUT SHAFT
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-53
DISASSEMBLY SERVICE POINT
<< A>> SNAP RING REMOVAL
1. Set special tools MD998907 and MD998924 as shown in the
illustration.
2. Compress the return spring and remove the snap ring.
ASSEMBLY SERVICE POINTS
>>A<< D-RING INSTALLATION
1. Install a D-ring in the groove in the underdrive clutch retainer
and piston, and in the groove in the outside of the spring
retainer. Be careful not to twist or damage the D-rings.
2. Apply ATF or petroleum jelly (Vaseline) to the D-rings.
>>B<< SNAP RING INSTALLATION
1. Place the snap ring on top of the spring retainer, and then
set special tool MD998907 as shown in the illustration.
2. Compress the return spring and install the snap ring.
AKX01042
MD998924
MD998907
AB
AKX01042
MD998924
MD998907
AB
REVERSE AND OVERDRIVE CLUTCH
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-54
>>C<< CLUTCH PLATE/CLUTCH DISC/CLUTCH REACTION
PLATE INSTALLATION
CAUTION
Immerse the clutch disc in ATF before assembling it.
Especially if the clutch disc is new, use it only after it has
been immersed in ATF for at least two hours.
1. Assemble the four clutch plates and four clutch discs one on
top of the other inside the underdrive clutch retainer. All four
clutch plates should be assembled so that the places with no
teeth (marked "A") are aligned with the holes in the retainer
(marked "B").
2. Install the clutch reaction plate in the direction shown.
In the same way as the clutch plates, assemble them so that
the areas with no teeth (marked "A") are aligned with the
holes in the retainer (marked "B").
>>D<< SNAP RING INSTALLATION
1. Install the snap ring into the groove of clutch retainer.
2. Set special tools MB991628 <F4A42>, MB991629 <F4A51>
and MD998924 as shown in the illustration, and then
compress the clutch element.
3. Check that the clearance between the snap ring and the
clutch reaction plate is within the standard value. If not within
the standard value, select a snap ring to adjust.
Standard value: 1.6
−
1.8 mm (0.0630
−
0.0709 inch)
REVER SE A ND O VERD R IVE CLUTC H
DISASSEMBLY AND ASSEMBLY
M1233024800020
NUMBER OF CLUTCH DISCS AND PLATES
AKX01044
B
A
AB
AKX01105
CLUTCH PLATES
ROUNDED EDGE
PISTON
SIDE
CLUTCH DISCS
AB
CLUTCH
REACTION
PLATE
AKX01045
MB991628
<F4A42>
OR
MB991629
<F4A51>
MD998924
AB
MODEL
PRESSURE
PLATE
CLUTCH DISC
CLUTCH PLATE
CLUTCH
REACTION
PLATE
Over drive clutch
F4A42
-
4
4
1
F4A51
1
4
3
1
Reverse clutch
-
2
2
1
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст