Mitsubishi Eclipse / Eclipse Spyder (2000-2002). Service and repair manual — part 502
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-300
CIRCUIT OPERATION
If the select switch of the shift switch assembly is set
to the sport mode, battery positive voltage will be
applied to the PCM (terminal number 109). If the shift
switch of the shift switch assembly is set to "UP" or
"DOWN" position, battery positive voltage will be
applied to the PCM (terminal number 122, 110).
COMMENT
The cause is probably a malfunction of the Park/
Neutral position switch circuit, shift switch assembly
circuit or a defective PCM.
TROUBLESHOOTING HINTS (The most likely
causes for this case:)
•
Malfunction of the Park/Neutral position switch
•
Malfunction of the shift switch assembly select
switch
AC001844
CONNECTOR: B-41
DIPSTICK
AB
AC001729 AN
CONNECTOR: C-41
AC001657
CONNECTOR: C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
PCM
AN
AC001691
CONNECTORS: C-101, C-107
C-101
JUNCTION BLOCK
(FRONT VIEW)
C-107
AN
AC001741
CONNECTOR: C-27
AK
AC001741
CONNECTOR: C-28
AM
AC001741
CONNECTOR: C-65
AP
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-301
•
Malfunction of the shift switch assembly shift
switch (Up)
•
Malfunction of the shift switch assembly shift
switch (Down)
•
Damaged harness, connector
•
Malfunction of the PCM
DIAGNOSIS
Required Special Tool:
MB991502: Scan Tool (MUT-II)
STEP 1. Using scan tool MB991502, check data list item 67:
Select Switch, item 68: Shift Switch (Up), item 69: Shift
Switch (Down).
CAUTION
To prevent damage to scan tool MB991502, always turn the
ignition switch to "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991502.
(1) Connect scan tool MB991502 to the data link connector.
(2) Turn the ignition switch to "ON" position.
(3) Set scan tool MB991502 to data reading mode for following
items.
a. item 67: Select Switch
b. item 68: Shift Switch (Up)
c. item 69: Shift Switch (Down)
•
The switches above are displayed, depending on the
selector lever condition as shown in the table.
(4) Turn the ignition switch to "LOCK" (OFF) position.
Q: Is the switch operating properly?
YES : This malfunction is intermittent. Refer to GROUP 00,
How to Use Troubleshooting/Inspection Service
Points
−
How to Cope with Intermittent Malfunction
NO : If completely NG: Go to Step 2. If item 68 and item 69
both are NG: Go to Step 4. If only item 67 is NG: Go
to Step 7. If only item 68 is NG: Go to Step 24. If only
item 69 is NG: Go to Step 28.
SELECTOR
LEVER
OPERATION
DATA LIST ITEM
67
68
69
D range
OFF
OFF
OFF
Sport mode
ON
OFF
OFF
Upshift and hold
the selector lever
ON
ON
OFF
Downshift and
hold the selector
lever
ON
OFF
ON
AC001252AE
16 PIN
MB991502
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-302
STEP 2. Check connectors C-65 at shift switch assembly
and C-61 <2.4L Engine> or C-63 <3.0L Engine> at PCM for
damage.
Q: Are the connectors in good condition?
YES : Go to Step 3.
NO : Repair or replace it. Refer to GROUP 00E, Harness
Connector Inspection
.
AC001741
CONNECTOR: C-65
AP
AC001657
CONNECTOR: C-61 <2.4L ENGINE> OR
C-63 <3.0L ENGINE>
PCM
AN
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-303
STEP 3. Using scan tool MB991502, check data list item 67:
Select Switch, item 68: Shift Switch (Up), item 69: Shift
Switch (Down).
CAUTION
To prevent damage to scan tool MB991502, always turn the
ignition switch to "LOCK" (OFF) position before
connecting or disconnecting scan tool MB991502.
(1) Connect scan tool MB991502 to the data link connector.
(2) Turn the ignition switch to "ON" position.
(3) Check the following items in the data list.
a. item 67: Select Switch
b. item 68: Shift Switch (Up)
c. item 69: Shift Switch (Down)
The switches above are displayed, depending on the
selector lever condition as shown in the table.
(4) Turn the ignition switch to "LOCK" (OFF) position.
Q: Is the switch operating properly?
YES : This malfunction is intermittent. Refer to GROUP 00,
How to Use Troubleshooting/Inspection Service
Points
−
How to Cope with Intermittent Malfunction
NO : Replace the PCM.
STEP 4. Check the shift switch assembly.
Refer to
, Transaxle Control.
Q: Is the switch operating properly?
YES : Go to Step 5.
NO : Replace the shift switch assembly. Refer to
, Transaxle Control.
SELECTOR
LEVER
OPERATION
DATA LIST ITEM
67
68
69
D range
OFF
OFF
OFF
Sport mode
ON
OFF
OFF
Upshift and hold
the selector lever
ON
ON
OFF
Downshift and
hold the selector
lever
ON
OFF
ON
AC001252AE
16 PIN
MB991502
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст