Mitsubishi Galant (2004+). Manual — part 1479
RADIO WITH CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-159
DIAGNOSIS
Required Special Tool:
• MB991223: Harness set
STEP 1. Measure the voltage at audio amplifier connector
C-113 in order to check the battery circuit of power supply
system to the audio amplifier.
(1) Disconnect audio amplifier connector C-113, and measure
at the wiring harness side.
(2) Measure the voltage between terminal 6 and ground.
• The voltage should measure approximately 12 volts
(battery positive voltage).
(3) Measure the voltage between terminal 16 and ground.
• The voltage should measure approximately 12 volts
(battery positive voltage).
Q: Is the measured voltage approximately 12 volts (battery
positive voltage)?
YES : Go to Step 4.
NO : Go to Step 2.
STEP 2. Check audio amplifier connector C-113 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is audio amplifier connector C-113 in good condition?
YES : Go to Step 3.
NO : Repair or replace the component(s). Refer to GROUP
00E, Harness Connector Inspection
. The
speakers should sound.
AC305233CC
CONNECTOR: C-113
HARNESS SIDE
AC204738FK
13
10 9
1
2
1211
3
4
18
8
1514
5
1716
7 6
CONNECTOR C-113
(HARNESS SIDE)
AC305233CC
CONNECTOR: C-113
HARNESS SIDE
RADIO WITH CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-160
STEP 3. Check the wiring harness between audio amplifier
connector C-113 (terminal 6 and 16) and the battery.
NOTE: Also check intermediate connector C-29 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connectors C-29 is damaged, repair
or replace the connector as described in GROUP 00E, Harness
Connector Inspection
.
Q: Is the wiring harness between audio amplifier connector
C-113 (terminal 6 and 16) and the battery in good
condition?
YES : There is no action to be taken.
NO : Repair the wiring harness. The speakers should
sound.
STEP 4. Measure the resistance at audio amplifier
connector C-113 in order to check the ground circuit to the
audio amplifier.
(1) Disconnect audio amplifier connector C-113, and measure
at the wiring harness side.
(2) Measure the resistance between terminal 7 and ground.
• The resistance should be 2 ohms or less.
(3) Measure the resistance between terminal 17 and ground.
• The resistance should be 2 ohms or less.
Q: Is the measured resistance 2 ohms or less?
YES : Go to Step 7.
NO : Go to Step 5.
AC305233CC
CONNECTOR: C-113
HARNESS SIDE
AC305231AI
CONNECTOR: C-29
AC305233CC
CONNECTOR: C-113
HARNESS SIDE
AC204738FL
13
10 9
1
2
1211
3
4
18
8
1514
5
1716
7 6
CONNECTOR C-113
(HARNESS SIDE)
RADIO WITH CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-161
STEP 5. Check audio amplifier connector C-113 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Is audio amplifier connector C-113 in good condition?
YES : Go to Step 6.
NO : Repair or replace the component(s). Refer to GROUP
00E, Harness Connector Inspection
. The
speakers should sound.
STEP 6. Check the wiring harness between audio amplifier
connector C-113 (terminal 7 and 17) and ground.
Q: Is the wiring harness between audio amplifier connector
C-113 (terminal 7 and 17) and ground in good
condition?
YES : There is no action to be taken.
NO : Repair the wiring harness. The speakers should
sound.
AC305233CC
CONNECTOR: C-113
HARNESS SIDE
AC305233CC
CONNECTOR: C-113
HARNESS SIDE
RADIO WITH CD PLAYER
TSB Revision
CHASSIS ELECTRICAL
54A-162
STEP 7. Check radio, CD player and CD changer connector
C-116 and audio amplifier connector C-114 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Are radio, CD player and CD changer connector C-116
and audio amplifier connector C-114 in good condition?
YES : Go to Step 8.
NO : Repair or replace the component(s). Refer to GROUP
00E, Harness Connector Inspection
. The
door speaker (LH) should sound.
STEP 8. Check the wiring harness between CD player and
CD changer connector C-116 (terminals 21, 24, 23, 31, 30
and 22) and audio amplifier connector C-114 (terminals 22,
23, 30, 24 and 31).
Q: Do the speakers sound normally?
YES : The procedure is complete.
NO : Repair or replace the audio amplifier.
AC305234
CONNECTORS: C-114, C-116
C-114
C-116
HARNESS SIDE
C-114
HARNESS SIDE
C-116
21
22
23
24
25
26
27
28
29
30
31
32
21
22
23
24
25
26
27
28
29
30
31
32
33
34
AV
AC305234
CONNECTORS: C-114, C-116
C-114
C-116
HARNESS SIDE
C-114
HARNESS SIDE
C-116
21
22
23
24
25
26
27
28
29
30
31
32
21
22
23
24
25
26
27
28
29
30
31
32
33
34
AV
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст