Mitsubishi Galant (2004+). Manual — part 1401
TOWING AND HOISTING
TSB Revision
GENERAL
00-27
TOWING WHEN KEYS ARE NOT AVAILABLE
When a locked vehicle must be towed and keys are not avail-
able, the vehicle may be lifted and towed from the front, pro-
vided the parking brake is released. If not released, the rear
wheels should be placed on a tow dolly.
.
SAFETY PRECAUTIONS
The following precautions should be taken when towing the
vehicle:
1. DO NOT LIFT OR TOW THE VEHICLE BY ATTACHING
TO OR WRAPPING AROUND THE BUMPER.
2. Any loose, protruding, or damaged parts such as hoods,
doors, fenders, trim, etc. should be secured or removed
prior to moving the vehicle.
3. Refrain from going under a vehicle when it is lifted by the
towing equipment, unless the vehicle is adequately sup-
ported by safety stands.
4. Never allow passengers to ride in a towed vehicle.
5. State and local rules and regulations must be followed when
towing a vehicle.
LIFTING, JACKING SUPPORT LOCATION
.
FLOOR JACK
CAUTION
• Never place a support at any point other than the speci-
fied one, or that point will be deformed.
• Any DTCs stored in the ABS-ECU cannot be erased if
there is a malfunction.
• For lifting, put rubber or similar material between the
side sill and rigid rack, otherwise the side sill area will
be damaged.
AC308631AB
Side view
Under view
FRONT MUD
GUARD
TOWING AND HOISTING
TSB Revision
GENERAL
00-28
.
POST TYPE
Special care should be taken when raising the vehicle on a
frame contact type hoist. The hoist must be equipped with the
proper adapters in order to support the vehicle at the proper
locations.
AC307266AB
RUBBER
RIGID RACK
CENTER MEMBER
RIGID RACK
NOTCH
REAR SUSPENSION CROSSMEMBER
NOTCH
RUBBER
TOWING AND HOISTING
TSB Revision
GENERAL
00-29
CAUTION
• When service procedures require removing rear sus-
pension, fuel tank and spare tire, place additional
weight on the rear end of vehicle, or anchor vehicle to
hoist to prevent tipping when the location of the center
of gravity changes.
• If the assembling support area contacts with the front
mud guard (arrow area as shown in the illustration), the
front mud guard will be damaged. Slide the assembling
support area to the front of the vehicle slightly to pre-
vent the damage.
AC308631AB
Side view
Under view
FRONT MUD
GUARD
AC307269
NOTCH
AB
NOTCH
GENERAL DATA AND SPECIFICATIONS
TSB Revision
GENERAL
00-30
GENERAL DATA AND SPECIFICATIONS
M1001000900473
.
GENERAL SPECIFICATIONS
<2.4L ENGINE>
AC305137
4
8
6
3
7
5
9
1
2
ITEM
DJ1ASRJYL4M/S
RHYL4M/SL9M/L5
M
DJ1ASRPYL4M/S
L9M/L5M
DJ1ASRXYL4M/S
L9M/5M
Vehicle
dimension
mm (in)
Overall length
1 4,840 (190.6)
4,840 (190.6)
4,840 (190.6)
Overall width
2 1,840 (72.4)
1,840 (72.4)
1,840 (72.4)
Overall height (unladen)
3 1,470 (57.9)
1,470 (57.9)
1,470 (57.9)
Wheelbase
4 2,750 (108.3)
2,750 (108.3)
2,750 (108.3)
Tread-front
5 1,570 (61.8)
1,570 (61.8)
1,570 (61.8)
Tread-rear
6 1,570 (61.8)
1,570 (61.8)
1,570 (61.8)
Overhang-front
7 985 (38.8)
985 (38.8)
985 (38.8)
Overhang-rear
8 1,105 (43.5)
1,105 (43.5)
1,105 (43.5)
Ground clearance
9 148 (5.8)
148 (5.8)
148 (5.8)
Vehicle
weight kg (lb)
Curb weight
1,530 (3,373)
1,540 (3,395)
1,550 (3,417)
Gross vehicle weight rating
1,960 (4,321)
1,960 (4,321)
1,960 (4,321)
Gross axle weight
rating-front
1,040 (2,293)
1,040 (2,293)
1,040 (2,293)
Gross axle weight
rating-rear
9,20 (2,028)
9,20 (2,028)
9,20 (2,028)
Seating capacity
5
Engine
Model No.
4G69
Piston displacement
2.4L
Transaxle
Model No.
F4A42
Type
4-speed automatic
Fuel system
Fuel supply system
Electronic controlled multiport fuel injection
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст