Mitsubishi Galant (2004+). Manual — part 163
12-1
GROUP 12
ENGINE
LUBRICATION
CONTENTS
GENERAL DESCRIPTION. . . . . . . . .
SPECIAL TOOLS. . . . . . . . . . . . . . . .
ON-VEHICLE SERVICE. . . . . . . . . . .
ENGINE OIL CHECK . . . . . . . . . . . . . . . . .
ENGINE OIL REPLACEMENT . . . . . . . . . .
ENGINE OIL FILTER REPLACEMENT . . .
ENGINE OIL PRESSURE CHECK . . . . . . .
SPECIFICATIONS . . . . . . . . . . . . . . .
FASTENER TIGHTENING
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . .
SERVICE SPECIFICATIONS . . . . . . . . . . .
SEALANT . . . . . . . . . . . . . . . . . . . . . . . . . .
GENERAL DESCRIPTION
TSB Revision
ENGINE LUBRICATION
12-2
GENERAL DESCRIPTION
M1121000100410
The lubrication method is a fully force-fed, full-flow filtration type.
ENGINE OILS
WARNING
Prolonged and repeated contact with mineral oil will result in the removal of natural fats from
the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains
potentially harmful contaminants which may cause skin cancer. Adequate means of skin pro-
tection and washing facilities must be provided.
.
Recommended Precautions
The most effective precaution is to adapt working
practices which prevent, as far as practical, the risk
of skin contact with mineral oils i.e. use enclosed
systems for handling used engine oil and degrease
components, where practical, before handling them.
.
Other precautions:
• Avoid prolonged and repeated contact with oil,
particularly used engine oil.
• Wear protective clothing, including impervious
gloves where practical.
• Avoid contaminating clothes with oil.
• Do not put oily rags in pockets.
• Do not wear heavily soiled clothing and
oil-soaked foot-wear. Overalls must be cleaned
regularly and kept separate from personal cloth-
ing.
• Where there is a risk of eye contact, eye protec-
tion should be worn i.e. chemical goggles or face
shields. In addition, an eye wash facility should
be provided.
• Obtain first aid treatment immediately for open
cuts and wounds.
• Wash regularly with soap and water to ensure all
oil is removed (skin cleansers and nail brushes
will help). After cleaning, apply lotion, etc., con-
taining lanolin to replace natural skin oils is
advised.
• Do not use gasoline, kerosene, diesel fuel, gas
oil, thinners or solvents for cleaning skin.
• Apply barrier creams before each work period.
• If skin disorders develop, obtain medical advice
immediately.
ITEM
SPECIFICATION
Oil pump type
2.4L Engine
Involute gear type
3.8L Engine
Trochoid type
Drive method
Crankshaft
SPECIAL TOOLS
TSB Revision
ENGINE LUBRICATION
12-3
SPECIAL TOOLS
M1121000600404
ON-VEHICLE SERVICE
ENGINE OIL CHECK
M1121000900397
1. Pull out the oil dipstick slowly and check that the oil level is
within the marks on the oil dipstick.
2. Check that the oil is not excessively dirty, that there is no
coolant or gasoline mixed in, and that it is sufficiently thick
and slippery.
TOOL
TOOL NUMBER AND
NAME
SUPERSESSION
APPLICATION
MB991610
Oil filter wrench
General service tool
Removal and installation
of engine oil filter (when
using oil filter MD356000)
MD998054
Engine oil pressure
switch wrench
General service tool or
MD998054-01
Removal and installation
of engine oil pressure
switch
MB991610
AC205268
MAXIMUM
MINIMUM
GOOD
AB
ON-VEHICLE SERVICE
TSB Revision
ENGINE LUBRICATION
12-4
ENGINE OIL REPLACEMENT
M1121001000450
1. Start the engine and allow it to warm up until the
temperature of the coolant reaches 80
− 90°C (176 −
194
°F).
WARNING
Use care as oil could be hot.
2. Remove the engine oil filler cap.
3. Remove the drain plug to drain oil.
4. Install a new drain plug gasket so that it faces in the
direction shown in the illustration, and then tighten the drain
plug to the specified torque.
Tightening torque: 39
± 5 N⋅m (29 ± 3 ft-lb)
5. Refill the specified quantity of oil.
Specified Engine Oil: Engine oils displaying ILSAC
certification symbol ("Starburst" symbol) or con-
forming the API classification SL.
Total quantity:
<2.4L Engine> 4.3 dm
3
(4.5 quarts)
<3.8L Engine> 4.6 dm
3
(4.9 quarts)
6. Install the engine oil filler cap.
7. Check oil level.
AC305936
DRAIN PLUG
GASKET
OIL PAN SIDE
39 ± 5 N·m
29 ± 3 ft-lb
AB
<2.4L ENGINE>
AC305937
DRAIN PLUG
GASKET
OIL PAN SIDE
39 ± 5 N·m
29 ± 3 ft-lb
AB
<3.8L ENGINE>
-20
0
0
20
20
40
40
60
80
100
120
30
10
50
-10
-20
-30
38
-18
F
C
SAE 10W-30
SAE 5W-20 (PREFERRED), 5W-30
AC209357AB
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст