Mitsubishi Galant (2004+). Manual — part 1715
17-1
GROUP 17
ENGINE AND
EMISSION
CONTROL
CONTENTS
ACCELERATOR SYSTEM . . . . . . . .
GENERAL DESCRIPTION . . . . . . . . . . . . .
AUTO-CRUISE CONTROL SYSTEM
GENERAL DESCRIPTION . . . . . . . . . . . . .
CONSTRUCTION AND OPERATION. . . . .
EMISSION CONTROL . . . . . . . . . . . .
GENERAL DESCRIPTION . . . . . . . . . . . . .
GENERAL DESCRIPTION . . . . . . . . . . . . .
ACCELERATOR SYSTEM
ENGINE AND EMISSION CONTROL
17-2
ACCELERATOR SYSTEM
GENERAL DESCRIPTION
M2170001000165
For the accelerator system, an electronic throttle
valve control system has been adopted, disposing of
an accelerator cable. This system detects the
amount of pressure applied to the accelerator pedal
by using a accelerator pedal-position sensor (APS)
in the accelerator pedal assembly for electronic con-
trol of the throttle valve angle.
CONSTRUCTION DIAGRAM
AC305917
ACCELERATOR PEDAL
ASSEMBLY
[BUILT-IN ACCELERATOR PEDAL
POSITION SENSOR (APS)]
STOPPER
AB
AUTO-CRUISE CONTROL SYSTEM
ENGINE AND EMISSION CONTROL
17-3
AUTO-CRUISE CONTROL SYSTEM
GENERAL DESCRIPTION
M2170001000143
By using the auto-cruise control, the driver can drive
at preferred speeds in a range of approximately 40 to
200 km/h (25 to 124 mph) without depressing the
accelerator pedal.
For this auto-cruise control system, in conjunction
with the electronic throttle valve control system, the
powertrain control module (PCM) electronically con-
trols the throttle valve.
CONSTRUCTION DIAGRAM
AC305704
AC206195
AC305701
AC305702
9 10 11 12 13 14 15 16
1
2 3
4 5 6 7 8
AC305703
AB
STOPLIGHT SWITCH
PCM
TRANSMISSION
RANGE SWITCH
THROTTLE BODY
(BUILT-IN THROTTLE
POSITION SENSOR
AND THROTTLE
ACTUATOR CONTROL
MOTOR)
"CRUISE" INDICATOR
LIGHT
AUTO-CRUISE
CONTROL SWITCH
DATA LINK
CONNECTOR
ACCELERATOR PEDAL
(BUILT-IN ACCELERATOR
PEDAL POSITION SENSOR)
AUTO-CRUISE CONTROL SYSTEM
ENGINE AND EMISSION CONTROL
17-4
COMPONENTS AND FUNCTIONS
COMPONENT
FUNCTION
Accelerator pedal position sensor
Informs the PCM of the accelerator pedal
depression.
"cruise" indicator light
The light is included in the combination meter and
illuminates when the "CRUISE" (MAIN) switch is in
the "ON" position.
Auto-cruise control switch "CRUISE" (MAIN) switch Power switch for cruise control.
"ACC/RES" switch
Vehicle speed is set with the "ACC/RES" switch and
"COAST/SET" switch.
"COAST/SET" switch
"CANCEL" switch
Cancels the cruise speed setting.
Cancel system
Stoplight switch
Sends a signal to cancel cruise control.
Transmission range
switch
Data link connector
If the MUT-III scan tool is connected, the diagnostic
trouble code and input check code from the PCM can
be read.
PCM
•
Judges how the cruise control is operating by
using input signals from the auto-cruise control
system and the cancel system, and sends the
throttle valve opening angle signal to the throttle
actuator control motor by using the accelerator
pedal position sensor signal.
•
The diagnostic trouble code and input check code
are sent to the data link connector.
•
When the "CRUISE" (MAIN) switch "ON" signal is
entered, a signal is sent to illuminate the
auto-cruise control indicator light.
Throttle actuator control motor
The throttle valve opens and closes in response to
the throttle angle control signal from the PCM.
Throttle position sensor
Informs the PCM of the throttle valve opening angle.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст