Mitsubishi Montero (1991+). Manual — part 43
1) Disconnect power transistor connectors. Using a DVOM,
connect positive ohmmeter lead to terminal No. 2 and negative lead to
terminal No. 7. See Fig. 7. Ensure there is no continuity.
2) Using a 1.5-volt dry cell battery, connect positive end of
1.5-volt battery to power transistor terminal No. 8 and negative end
to terminal No. 7. DVOM should now read continuity at power transistor
terminals No. 2 and No. 7. Replace power transistor if it does not
test as described.
Fig. 7: Power Transistor Connector ID (Colt, Summit & Mirage)
Courtesy of Mitsubishi Motor Sales of America.
Power Transistor (Stealth & 3000GT)
When testing power transistor, refer to POWER TRANSISTOR
TESTING (STEALTH & 3000GT) table.
Fig. 8: Power Transistor Connector ID (Stealth & 3000GT)
Courtesy of Mitsubishi Motor Sales of America.
POWER TRANSISTOR TESTING TABLE (STEALTH & 3000GT) (1)
(2) Analog Ohmmeter (2) With 1.5 V Battery
Cylinders Connected Between Connected Between
Tested Terminals (No 1.5 V Battery) Terminals
1 & 4 . . . 3 & 7 No Continuity . ... 6 & 7 Continuity
2 & 5 . . . 2 & 7 No Continuity . ... 5 & 7 Continuity
3 & 6 . . . 1 & 7 No Continuity . ... 4 & 7 Continuity
(1) - All tests performed with power transistor disconnected. Replace
power transistor if it does not test as described.
(2) - See Fig. 8 for terminal identification.
MAGNETIC & OPTICAL IGNITION
Ignition Coil Resistance
1) Using a DVOM, measure primary coil resistance between
positive and negative terminals of coil. See Fig. 9. For ignition coil
terminal identification See Fig. 11 - 13.
2) Measure secondary coil resistance between coil positive
terminal and ignition coil tower. See Fig. 10.
3) Primary and secondary coil resistance should be within
specification. See IGNITION COIL RESISTANCE table.
Fig. 9: Testing Ignition Coil Primary Resistance (6-Cylinder)
Courtesy of Mitsubishi Motor Sales of America.
Fig. 10: Testing Ignition Coil Secondary Resistance (6-Cylinder)
Courtesy of Mitsubishi Motor Sales of America.
Fig. 11: Ign Coil Term ID (Colt, Eclipse, Mirage 1.5L, P/U & Ram 50
2.4L)
Courtesy of Mitsubishi Motor Sales of America.
Fig. 12: Ign Coil Term ID (Colt Vista, Galant 2.0L SOHC & Montero,
P/U & Ram 50 3.0L)
Courtesy of Mitsubishi Motor Sales of America.
Fig. 13: Ignition Coil Terminal ID (Stealth & 3000GT)
Courtesy of Mitsubishi Motor Sales of America.
IGNITION COIL RESISTANCE TABLE - Ohms @ 68
F (20
C)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст