Mitsubishi Montero (1991+). Manual — part 23
recovery/recycling equipment. Remove glove box with lower frame
attached. Loosen duct joint bolt to free duct joint. Disconnect A/C
switch harness. Disconnect evaporator drain hose.
2) Disconnect refrigerant lines at firewall side of engine
compartment. Remove evaporator top attaching bolts in passenger
compartment. Remove evaporator assembly. See Fig. 12 or 13. To
install, reverse removal procedure.
Fig. 12: Exploded View of Front Evaporator (Montero)
Courtesy of Mitsubishi Motor Sales of America.
Fig. 13: Exploded View of Rear Evaporator Assembly (Montero)
Courtesy of Mitsubishi Motor Sales of America.
Removal & Installation (Pickup & Ram-50)
Discharge A/C system using approved refrigerant
recovery/recycling equipment. Disconnect liquid pipe and suction hose
connections. Remove glove box assembly. Remove air and defroster
ducts. Remove evaporator drain hose and clamp. Disconnect wiring
connectors. Remove nut from firewall evaporator assembly mounting
bracket. Remove evaporator assembly. To install, reverse removal
procedure.
WIRING DIAGRAMS
Fig. 14: Manual A/C-Heater Wiring Diagram (Colt Vista)
Fig. 15: Manual A/C-Heater Wiring Diagram (Montero)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст