Mitsubishi Galant 9G. Manual — part 531
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-202
DIAGNOSIS
Required Special Tool:
• MB991958: Scan Tool (MUT-III Sub Assembly)
• MB991824: V.C.I.
• MB991827: MUT-III USB Cable
• MB991910: MUT-III Main Harness A
STEP 1. Using scan tool MB991958, check actuator test
item 02: Underdrive Solenoid Valve.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Set scan tool MB991958 to the actuator test mode.
• Item 02: Underdrive Solenoid Valve.
• An audible clicking or buzzing should be heard when
the underdrive solenoid valve is energized.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is the solenoid valve operating properly?
YES : It can be assumed that this malfunction is intermittent.
Refer to GROUP 00, How to Use
Troubleshooting/Inspection Service Points
− How to
Cope with Intermittent Malfunctions
.
NO : Go to Step 2.
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-203
STEP 2. Using scan tool MB991958, read the A/T
diagnostic trouble code.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Check for A/T diagnostic trouble code.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Is DTC 54 set? (DTC 54 may be set along with multiple
DTC 54: A/T Control Relay
System.
NO : Go to Step 3.
STEP 3. Using scan tool MB991958, read the A/T
diagnostic trouble code.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Check for A/T diagnostic trouble code.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
Q: Are DTC 33 and DTC 34 set? (Multiple DTCs may be set).
YES : Go to Step 8.
NO : Go to Step 4.
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-204
STEP 4. Measure the underdrive solenoid valve resistance
at A/T control solenoid valve assembly connector B-108.
(1) Disconnect connector B-108 and measure at the solenoid
valve side.
(2) Measure the resistance between solenoid valve assembly
connector B-108 terminals 3 and 9.
Resistance value: 2.7
−3.4 Ω [at 20°C (68°F)]
Q: Is the measured resistance 2.7
−3.4 Ω [at 20°C (68°F)]?
YES : Go to Step 6.
NO : Go to Step 5.
STEP 5. Measure the solenoid valve resistance at the
underdrive solenoid valve assembly inside the transaxle.
(1) Disconnect connector B-108-1 and measure at the solenoid
valve side.
(2) Measure the resistance between Underdrive solenoid valve
terminals 1 and 2.
Resistance value: 2.7
−3.4 Ω [at 20°C (68°F)]
Q: Is the measured resistance 2.7
−3.4 Ω [at 20°C (68°F)?
YES : Replace the harness wire between A/T control
solenoid valve assembly connector B-108 and the
solenoid valves.
NO : Replace the Underdrive solenoid valve. Refer to
GROUP 23B, Valve Body
.
AC306322
CONNECTOR: B-108
B-108 (GR)
AC
TRANSMISSION
RANGE SWITCH
2
7
1
8
3
9
4
6
10
5
AC210677
2
7
1
8
3
9
4
6
10
5
AB
B-108 HARNESS CONNECTOR:
A/T CONTROL SOLENOID VALVE
ASSEMBLY SIDE
AC002219
CONNECTOR: B-108-1
BX
B-108-1
VALVE BODY
ASSEMBLY
2
1
AC201141
B-108-1 HARNESS CONNECTOR:
UNDERDRIVE
SOLENOID VALVE SIDE
BA
AUTOMATIC TRANSAXLE DIAGNOSIS
TSB Revision
AUTOMATIC TRANSAXLE
23A-205
STEP 6. Check PCM connector B-21 and A/T control
solenoid valve assembly connector B-108 for loose,
corroded or damaged terminals, or terminals pushed back
in the connector.
Q: Are the connectors and terminals in good condition?
YES : Go to Step 7.
NO : Repair or replace the damaged components. Refer to
GROUP 00E, Harness Connector Inspection
AC306248AC
B-21
(B)
CONNECTOR: B-21
PCM
AIR
CLEANER
73
80
54
67
60
71 72
77 78 79
64
51
59
58
65
52
66
53
75
74
76
81 82
83
63
JAE
62
68
61
55
69
56
70
57
AC306322
CONNECTOR: B-108
B-108 (GR)
AC
TRANSMISSION
RANGE SWITCH
2
7
1
8
3
9
4
6
10
5
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст