Mitsubishi Galant 9G. Manual — part 1241
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-68
(3) Measure the voltage between joint connector (3) terminals
14 and body ground.
OK: 1.0 V or less
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
Q: Does the voltage measure 1.0 V or more?
YES : If the voltage measures 1.0 V or less, diagnose CAN
bus lines thoroughly by referring to
NO : If the voltage measures more than 1.0 V, repair the
wiring harness between intermediate connector C-22
and joint connector (3).
STEP 41. Check the CAN_L line (communication line only)
between joint connector (3) and the data link connector for
a short to the power supply. Measure the voltage at joint
connector (3) C-02.
CAUTION
A digital multimeter should be used. For details refer to
.
CAUTION
The test wiring harness should be used. For details refer to
.
(1) Disconnect joint connector (3) C-02, and measure the
voltage at the wiring harness side of joint connector (3)
C-02.
(2) Turn the ignition switch to the "ON" position.
(3) Measure the voltage between joint connector (3) terminal
18 and body ground.
OK: 1.0 V or less
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
Q: Does the voltage measure 1.0 V or less?
YES : If the voltage measures 1.0 V or less, go to Step 42.
NO : If the voltage measures more than 1.0 V, repair the
wiring harness between joint connector (3) and the
data link connector.
AC209365
11
22
10
21
9
20
8
19
7
18
6
17
5
16
4
15
3
14
2
13
1
12
AC209365
AC209365GE
HARNESS SIDE: C-02
TEST
HARNESS
AC305231AP
CONNECTOR: C-02
AC209365
11
22
10
21
9
20
8
19
7
18
6
17
5
16
4
15
3
14
2
13
1
12
AC209365
AC209365GH
HARNESS SIDE: C-02
TEST HARNESS
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-69
STEP 42. Check the CAN_L line (communication line only)
between intermediate connector C-29 and joint connector
(3) for a short to the power supply. Measure the voltage at
joint connector (3) C-02.
CAUTION
A digital multimeter should be used. For details refer to
.
CAUTION
The test wiring harness should be used. For details refer to
.
(1) Disconnect intermediate connector C-29 and joint
connector (3) C-02, and measure the voltage at the wiring
harness side of joint connector (3) C-02.
(2) Turn the ignition switch to the "ON" position.
(3) Measure the voltage between joint connector (3) terminal
20 and body ground.
OK: 1.0 V or less
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
Q: Does the voltage measure 1.0 V or less?
YES : If the voltage measures 1.0 V or less, diagnose CAN
bus lines thoroughly by referring to
NO : If the voltage measures more than 1.0 V, repair the
wiring harness between intermediate connector C-29
and joint connector (3).
AC305232
CONNECTORS: C-02, C-29
AG
C-02
C-02
C-29
C-29
AC209365
11
22
10
21
9
20
8
19
7
18
6
17
5
16
4
15
3
14
2
13
1
12
AC209365
AC209365GI
HARNESS SIDE: C-02
TEST HARNESS
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-70
STEP 43. Check the CAN_L line (communication line only)
between intermediate connector and the powertrain
control module connector for short to ground. Measure the
voltage at intermediate connector C-29.
CAUTION
A digital multimeter should be used. For details refer to
.
CAUTION
The test wiring harness should be used. For details refer to
.
(1) Disconnect intermediate connector C-29 and powertrain
control module connector B-19, and measure the voltage at
the wiring harness side of intermediate connector C-29.
(2) Turn the ignition switch to the "ON" position.
AC306248AD
B-19 (B)
CONNECTOR: B-19
PCM
AIR
CLEANER
HARNESS SIDE
AC305231AI
CONNECTOR: C-29
DIAGNOSIS
TSB Revision
CONTROLLER AREA NETWORK (CAN)
54C-71
(3) Measure the voltage between intermediate connector
terminal 12 and body ground.
OK: 1.0 V or less
CAUTION
Strictly observe the specified wiring harness repair proce-
dure. For details refer to
Q: Does the voltage measure 1.0 V or less?
YES : If the voltage measures 1.0 V or less, diagnose CAN
bus lines thoroughly by referring to
NO : If the voltage measures more than 1.0 V, repair the
wiring harness between intermediate connector C-29
and the powertrain control module connector.
AC209365
2 3
27
32
28
33
16
15
4 5
19
18
29
17
34
7 8
35
22
21
9 10
30
36
31
37
25
24
23
6
20
1
14
26
11
13
12
38
AC209365
MALE SIDE: C-29
TEST HARNESS
GA
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст