Mitsubishi Galant 9G. Manual — part 287
MANUAL A/C DIAGNOSIS
TSB Revision
HEATER, AIR CONDITIONING AND VENTILATION
55A-224
STEP 3. Check A/C pressure sensor connector A-30 for
loose, corroded or damaged terminals, or terminals
pushed back in the connector.
Q: Is A/C pressure sensor connector A-30 in good
condition?
YES : Go to Step 4.
NO : Repair or replace the connector. Refer to GROUP
00E, Harness Connector Inspection
. Check
that the air conditioning works normally.
AC305206
CONNECTOR: A-30
AY
HARNESS SIDE
A-30 (B)
AC305234
CONNECTORS: C-15, C-16
C-16 (B)
HARNESS SIDE
C-16
C-15
C-15 (B)
HARNESS SIDE
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
AG
MANUAL A/C DIAGNOSIS
TSB Revision
HEATER, AIR CONDITIONING AND VENTILATION
55A-225
STEP 4. Check the A/C pressure sensor.
(1) Assemble a gauge manifold on the high pressure service
valve.
(2) Disconnect the A/C pressure sensor connector and connect
special tool test harness MB991658 as shown in the
illustration.
(3) Turn ON the engine and then turn ON the air conditioner
switch.
(4) At this time, check to see that the voltage of A/C pressure
sensor terminal No. 2 reflects the specifications of the
figure.
NOTE: The allowance shall be defined as
±
5%.
Q: Is the A/C pressure sensor in good condition?
YES : Go to Step 5.
NO : Replace the A/C pressure sensor. Check that the air
conditioning works normally.
AC305034
A/C PRESSURE SENSOR
AD
AC307368
A/C
PRESSURE
SENSOR
SIDE
MB991658
AB
HARNESS SIDE
AC208297AB
REFRIGERANT PRESSURE (MPa)
OUTPUT VOLTAGE
(V)
0
1
2
3
5
4
1
2
3
MANUAL A/C DIAGNOSIS
TSB Revision
HEATER, AIR CONDITIONING AND VENTILATION
55A-226
STEP 5. Check A/C-ECU C-15 and C-16 for loose, corroded
or damaged terminals, or terminals pushed back in the
connector.
Q: Are A/C-ECU C-15 and C-16 in good condition?
YES : Go to Step 6.
NO : Repair or replace the connector. Refer to GROUP
00E, Harness Connector Inspection
. Check
that the air conditioning works normally.
AC305206
CONNECTOR: A-30
AY
HARNESS SIDE
A-30 (B)
AC305234
CONNECTORS: C-15, C-16
C-16 (B)
HARNESS SIDE
C-16
C-15
C-15 (B)
HARNESS SIDE
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
AG
MANUAL A/C DIAGNOSIS
TSB Revision
HEATER, AIR CONDITIONING AND VENTILATION
55A-227
STEP 6. Check the wiring harness between A/C-ECU
connector C-15 (terminal 12), C-16 (terminals 34 and 26)
and A/C pressure sensor connector A-30 (terminals 3, 1
and 2).
NOTE: Also check intermediate connector C-29 for loose, cor-
roded, or damaged terminals, or terminals pushed back in the
connector. If intermediate connector C-29 is damaged, repair or
replace the connector as described in GROUP 00E, Harness
Connector Inspection
.
Q: Is the wiring harness between A/C-ECU connector C-15
(terminal 12), C-16 (terminals 34 and 26) and A/C
pressure sensor connector A-30 (terminals 3, 1 and 2) in
good condition?
YES : Repair the A/C-ECU. Check that the air conditioning
works normally.
NO : Repair the wiring harness. Check that the air
conditioning works normally.
AC305206
CONNECTOR: A-30
AY
HARNESS SIDE
A-30 (B)
AC305234
CONNECTORS: C-15, C-16
C-16 (B)
HARNESS SIDE
C-16
C-15
C-15 (B)
HARNESS SIDE
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
AG
AC305231AI
CONNECTOR: C-29
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст