Mitsubishi Galant 9G. Manual — part 622
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-20
17.Remove each accumulator piston and spring.
18.Remove the manual control lever shaft roller.
19.Remove the manual control lever shaft and the parking pawl
rod.
20.Remove the torque converter housing mounting bolts
(eighteen pieces), and then remove the torque converter
housing.
21.Remove the differential bearing outer race and spacer from
the torque converter housing.
22.Remove the O-rings (two pieces).
NUMBER
NAME
1
For low-reverse brake
2
For underdrive clutch
3
For second brake
4
For overdrive clutch
AK300229AD
4
3
2
1
AK300230AD
PARKING
PAWL ROD
MANUAL
CONTROL
LEVER
SHAFT
ROLLER
MANUAL CONTROL
LEVER SHAFT
AK301762
AK300232
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-21
23.Remove the differential.
24.Remove the oil filter.
25.Remove the oil pump mounting bolts (six pieces).
26.Use special tools MD998333 in position shown in the
drawing.
27.Turn special tools MD998333 to remove the oil pump.
28.Remove the oil pump gasket.
AK301866
AK300234
AK300235
AK300236AD
MD998333
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-22
29.Remove thrust washer number 1.
30.Holding the input shaft, remove the underdrive clutch and
input shaft.
31.Remove thrust bearing number 2.
32.Remove the underdrive clutch hub.
AK300237
AK300238
AK300239
AK300240
TRANSAXLE
TSB Revision
AUTOMATIC TRANSAXLE OVERHAUL
23B-23
33.Remove the parking pawl shaft, and then remove the spacer
and spring.
34.Remove the parking roller support shafts (two pieces), and
then remove the parking pawl and parking roller support.
35.Remove the rear.
36.Remove thrust race number 8.
37.Remove the seal rings (four pieces).
38.Remove the input shaft rear bearing.
39.Remove the O-rings (three pieces).
AK300241
AK300242
AK300463
AK300464
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст