Mitsubishi Galant 9G. Manual — part 140

ON-VEHICLE SERVICE

TSB Revision

SIMPLIFIED WIRING SYSTEM (SWS)

54B-556

ITEM (multi-center display)

ADJUSTMENT DETAILS

Lights

Headlight auto-cutout function

The headlight automatic shutoff function can
be set in the following ways.

a. Auto-cutout only when the ignition is turned

OFF while lights are on (default)

b. Auto-cutout when ignition is turned OFF at

any time

c. No auto-cutout

Dome light cutout time

The interior dimmer delay period can be set in
the following ways.

a. 0 second
b. 15 seconds
c. 30 seconds (default)
d. 60 seconds
e. 120 seconds
f. 180 seconds

Interior light auto-cutout time

The period before the interior illumination is
turned off automatically can be set in the
following ways.

a. 3 minutes
b. 30 minutes (default)
c. 60 minutes
d. No auto-cutout

Wipers

Windshield wiper speed-sensitive
operation

The speed-sensitive wiper function can be
activated or deactivated. (ON by default)

Rear wiper intermittent interval

*

−

ON-VEHICLE SERVICE

TSB Revision

SIMPLIFIED WIRING SYSTEM (SWS)

54B-557

NOTE: The item of the rear wiper is shown on the
display, but the rear wiper can not be customized
because it is not equipped on GALANT.

Keyless entry and
power door lock
system

Keyless entry system confirmation
by horn

The horn answerback honking conditions can
be set in the following ways.

a. Horn sounds
b. Horn sounds if doors are already locked

(default)

c. Horn does not sound

Keyless entry system confirmation
by turn-signal lights

The hazard answerback flashing conditions
can be set in the following ways.

a. Locking and unlocking (default)
b. Locking only
c. Unlocking only
d. No indication

Time until automatic relocking after
unlock operation using keyless
entry system

The timed lock period after unlocking with the
keyless entry transmitter can be set to the
following times.

a. 30 seconds (default)
b. 60 seconds
c. 120 seconds
d. 180 seconds

Unlock operation using keyless
entry system or door key

The unlocking operations after unlocking with
or without a key can be set in the following
ways.

a. Unlock driver's door on first unlock

operation, and unlock all doors on second
unlock operation (default)

b. Unlock all doors on first unlock operation

Buzzers

Turn-signal buzzer

The turn-signal buzzer function can be
activated or deactivated. (OFF by default)

Door-ajar warning buzzer

The door ajar warning buzzer function can be
activated or deactivated (ON by default).

Default

Initialization of above mentioned functions

ITEM (multi-center display)

ADJUSTMENT DETAILS

NOTES

52A-1

GROUP 52A

INTERIOR

CONTENTS

GENERAL DESCRIPTION. . . . . . . . .

52A-2

SEAT BELT DIAGNOSIS. . . . . . . . . .

52A-2

SPECIAL TOOLS. . . . . . . . . . . . . . . .

52A-2

INSTRUMENT PANEL ASSEMBLY*.

52A-3

REMOVAL AND INSTALLATION . . . . . . . .

52A-3

DISASSEMBLY AND ASSEMBLY . . . . . . .

52A-8

FLOOR CONSOLE ASSEMBLY . . . .

52A-9

REMOVAL AND INSTALLATION . . . . . . . .

52A-9

TRIMS. . . . . . . . . . . . . . . . . . . . . . . . .

52A-10

REMOVAL AND INSTALLATION . . . . . . . .

52A-10

DOOR TRIM. . . . . . . . . . . . . . . . . . . .

52A-13

REMOVAL AND INSTALLATION . . . . . . . .

52A-13

DISASSEMBLY AND ASSEMBLY . . . . . . .

52A-16

HEADLINING . . . . . . . . . . . . . . . . . . .

52A-18

REMOVAL AND INSTALLATION . . . . . . . .

52A-18

INSIDE REAR VIEW MIRROR . . . . . .

52A-19

FRONT SEAT ASSEMBLY* . . . . . . . .

52A-20

REMOVAL AND INSTALLATION . . . . . . . .

52A-20

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .

52A-22

DISASSEMBLY AND ASSEMBLY . . . . . . .

52A-25

REAR SEAT ASSEMBLY. . . . . . . . . .

52A-29

REMOVAL AND INSTALLATION . . . . . . . .

52A-29

DISASSEMBLY AND REASSEMBLY . . . . .

52A-31

FRONT SEAT BELT* . . . . . . . . . . . . .

52A-32

REMOVAL AND INSTALLATION . . . . . . . .

52A-32

INSPECTION. . . . . . . . . . . . . . . . . . . . . . . .

52A-33

REAR SEAT BELT . . . . . . . . . . . . . . .

52A-33

REMOVAL AND INSTALLATION . . . . . . . .

52A-33

SPECIFICATIONS . . . . . . . . . . . . . . .

52A-34

FASTENER TIGHTENING
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . .

52A-34

WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES

WARNING

•

Imp roper service o r maintenance of any comp onent of th e SRS, or an y SRS-related component, can lead to

perso nal injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and
passenger (fro m rendering the SRS in operative).

•

Service or mainten ance of an y SR S compon en t or SRS-related component must be performed only at an
autho riz ed MITSUBISH I d ealer.

•

MITSUBISHI dealer personnel must thoro ughly review this man ual, and especially its GROUP 52B - Supp lemental
Restrain t System (SRS) before beginnin g any service or maintenance of any component of the SRS or an y

SRS-related component.

NOTE

T he SRS includes the following c omponents : SRS air bag control unit, SRS warning light, front impact s ensors, air bag module,
c lock spring, and interc onnecting wiring. Other SR S-related components (that may hav e to be removed/installed in connection

with SR S serv ice or maintenance) are indicated in the table of contents by an as terisk (*).

Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS

AFTER HANDLING.

WARNING