Mitsubishi Galant 9G. Manual — part 458
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-50
STEP 21. Using scan tool MB991958, read the diagnostic
trouble codes.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Set scan tool MB991958 to read the diagnostic trouble
).
(4) Turn the ignition switch to the "LOCK" (OFF) position.
(5) Disconnect scan tool MB991958.
Q: Is DTC 22 set?
YES : Replace the PCM. [Refer to GROUP 13A, Power
Control Module (PCM)
] <2.4L engine> or
[Refer to GROUP 13B, Power Control Module (PCM)
] <3.8L engine>. Then go to Step 22.
NO : It can be assumed that this malfunction is intermittent.
(Refer to GROUP 00, How to Use
Troubleshooting/Inspection Service Points
− How to
Cope with Intermittent Malfunction
STEP 22. Using scan tool MB991958, read the diagnostic
trouble codes.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Set scan tool MB991958 to read the diagnostic trouble
).
(4) Turn the ignition switch to the "LOCK" (OFF) position.
(5) Disconnect scan tool MB991958.
Q: Is DTC 22 set?
YES : Return to Step 1.
NO : The procedure is complete.
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-51
DTC 23: Powertrain Control Module (PCM) and Its Related Components
.
DTC SET CONDITIONS
This DTC is set when there is an failure in the PCM
and its related components.
.
TROUBLESHOOTING HINTS (THE MOST
LIKELY CAUSES FOR THIS CODE TO BE
SET ARE:)
• Malfunction of the MFI system.
• Malfunction of the A/T system.
• Malfunction of the PCM.
DIAGNOSIS
Required Special Tools:
• MB991958: Scan Tool (MUT-III Sub Assembly)
• MB991824: V.C.I.
• MB991827: MUT-III USB Cable
• MB991910: MUT-III Main Harness A
STEP 1. Using scan tool MB991958, read the MFI system
diagnostic trouble code.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Check for MFI system diagnostic trouble code. (Refer to
GROUP 13A, MFI Diagnosis
− Diagnostic Function − How
to Read and Erase Diagnostic Trouble Code
<2.4L engine> or (Refer to GROUP 13B, MFI Diagnosis
−
Diagnostic Function
− How to Read and Erase Diagnostic
) <3.8L engine>.
(4) Turn the ignition switch to the "LOCK" (OFF) position.
(5) Disconnect scan tool MB991958.
Q: Is any DTC set?
YES : Diagnose the MFI system. (Refer to GROUP 13A,
MFI Diagnosis
− Diagnostic Trouble Code Chart
) <2.4L engine> or (Refer to GROUP 13B,
MFI Diagnosis
− Diagnostic Trouble Code Chart
) <3.8L engine>. Then go to Step 4.
NO : Go to Step 2.
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-52
STEP 2. Using scan tool MB991958, read the A/T system
diagnostic trouble code.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Check for A/T system diagnostic trouble code. (Refer to
GROUP 23A, A/T Diagnosis
− Diagnostic Function − How
to Read and Erase Diagnostic Trouble Code
(4) Turn the ignition switch to the "LOCK" (OFF) position.
(5) Disconnect scan tool MB991958.
Q: Is any DTC set?
YES : Diagnose the A/T system. (Refer to GROUP 23A, A/T
Diagnosis
− Diagnostic Trouble Code Chart
NO : Go to Step 3.
STEP 3. Using scan tool MB991958, read the auto-cruise
control system diagnostic trouble code.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Use scan tool MB991958 to read the auto-cruise control
system diagnostic trouble codes. (Refer to
(4) Turn the ignition switch to the "LOCK" (OFF) position.
(5) Disconnect scan tool MB991958.
Q: Is DTC 23 set?
YES : Replace the PCM. [Refer to GROUP 13A, Power
Control Module (PCM)
] <2.4L engine> or
[Refer to GROUP 13B, Power Control Module (PCM)
] <3.8L engine>. Then go to Step 4.
NO : It can be assumed that this malfunction is intermittent.
(Refer to GROUP 00, How to Use
Troubleshooting/Inspection Service Points
− How to
Cope with Intermittent Malfunction
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
AUTO-CRUISE CONTROL
TSB Revision
ENGINE AND EMISSION CONTROL
17-53
STEP 4. Using scan tool MB991958, read the auto-cruise
control system diagnostic trouble code.
CAUTION
To prevent damage to scan tool MB991958, always turn the
ignition switch to the "LOCK" (OFF) position before con-
necting or disconnecting scan tool MB991958.
(1) Connect scan tool MB991958 to the data link connector.
(2) Turn the ignition switch to the "ON" position.
(3) Use scan tool MB991958 to read the auto-cruise control
system diagnostic trouble codes. (Refer to
(4) Turn the ignition switch to the "LOCK" (OFF) position.
(5) Disconnect scan tool MB991958.
Q: Is DTC 23 set?
YES : Return to Step 1.
NO : The procedure is complete.
AC305412
AB
MB991910
DATA LINK
CONNECTOR
MB991824
MB991827
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст