Mitsubishi L200. Manual — part 669
COMBINATION METER
CHASSIS ELECTRICAL
54A-43
SPECIAL TOOLS
M1540200300028
COMBINATION METER
CHASSIS ELECTRICAL
54A-44
Tool
Number
Name
Use
MB990784
Ornament remover
Combination meter bezel removal
MB990784
COMBINATION METER
CHASSIS ELECTRICAL
54A-45
MB991955
a. MB991824
b. MB991827
c. MB991910
d. MB991911
e. MB991825
f. MB991826
M.U.T.-III sub-
assembly
a. Vehicle
Communication
Interface (V.C.I.)
b. M.U.T.-III USB
cable
c. M.U.T.-III main
harness A
(Vehicles with CAN
communication
system)
d. M.U.T.-III main
harness B
(Vehicles without
CAN
communication
system)
e. M.U.T.-III measure
adapter
f. M.U.T.-III trigger
harness
CAUTION
For vehicles with CAN
communication, use M.U.T.-III
main harness A to send
simulated vehicle speed. If you
connect M.U.T.-III main harness
B instead, the CAN
communication does not
function correctly.
Check for other system diagnosis
code and other system data list
MB991223
a. MB991219
b. MB991220
c. MB991221
d. MB991222
Harness set
a. Check harness
b. LED harness
c. LED harness
adapter
d. Probe
Continuity check and voltage
measurement at harness wire or
connector
a. For checking connector pin
contact pressure
b. For checking power supply
circuit
c. For checking power supply
circuit
d. For connecting a locally
sourced tester
Tool
Number
Name
Use
MB991910
MB991826
MB991955
MB991911
MB991824
MB991827
MB991825
a
b
c
d
e
f
DO NOT USE
MB991223
a
d
c
b
DO NOT USE
BA
COMBINATION METER
CHASSIS ELECTRICAL
54A-46
TROUBLESHOOTING
DIAGNOSIS TROUBLESHOOTING FLOW
M1540203800022
Refer to GROUP 00
− Contents of Troubleshooting .
TROUBLE SYMPTOM CHART
M1540200800034
CAUTION
During diagnosis, a diagnosis code associated
with other system may be set when the ignition
switch is turned on with connector(s) discon-
nected. On completion, confirm all systems for
diagnosis code(s). If diagnosis code(s) are set,
erase them all.
MB992006
Extra fine probe
Continuity check and voltage
measurement at harness wire or
connector
Tool
Number
Name
Use
MB992006
Trouble symptom
Inspection
procedure
number
Reference page
Power supply circuit system check.
1
Odometer and trip meter is not displayed.
2
No needle meters work.
3
If the ignition switch is turned to the ON position, the indicator and
warning lamps do not illuminate.
4
Speedometer does not work (other meters work).
5
Tachometer does not work (other meters work).
6
Fuel gauge does not work (other meters work).
7
Engine coolant temperature gauge does not work (other meters work).
8
The high-beam indicator does not illuminate.
9
The front fog lamps indicator does not illuminate.
10
The rear fog lamps indicator does not illuminate.
11
The turn-signal lamp indicator does not illuminate.
12
The door-ajar warning lamp does not illuminate.
13
The seat belt warning lamp does not illuminate or flash.
14
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст